{{ :cs:hw:05-sensors:sd115c.png?direct&220|}}
* Outdoor variant with IP65 protection
* Digital 1W senzor featuring the **DS18B20** chip
* Metal probe dimensions: ⌀6* x 25 mm (±0,1 mm*)
* Plastic cover dimensions (**h** x **w** x **d**): 70 x 63 x 34 mm
* Temperature sensors are suitable for temperature measuring in the range of -10°C to 85°C. With reduced accuracy, the sensors can be used in a range of -30°C to 100°C
* Head ambient working temperature: -30°C to 100°C
* Connection: shrouded terminal
* Suitable for the 4-wire connection used on all Unipi sensors and hubs
* Can be wired to the RJ45 connector and connected to the Extension xG18 or Unipi unit via a suitable [[https://www.unipi.technology/cables-reductions-hubs-c41|splitter]]
* For more info and tips regarding the sensor connection, please visit the article about [[en:automation:02-glossary:1wire-hidden#rj45_connector_connection_for_unipi_1-wire|the 1-Wire bus]]
* Link to e-shop: [[https://www.unipi.technology/1-wire-temperature-sensor-outdoor-wall-mounted-p396|link]]
Examples of use:
* Measuring temperature in outdoor spaces or industrial halls
* Suitable for use in humid spaces and areas (cellars, greenhouses, etc.)
Applicable for:
* All Unipi units with a 1W bus, including the Unipi 1.1/Lite
* With Unipi 1W hub and splitter
* Unipi Extension xG18
For connection to Unipi Patron or Unipi Neuron units, all you need to do is to interconnect the suitable terminals. For connection to Extension xG18, use a network cable (patch cord) with one of the connectors cut off. Alternatively, you can use a standard FTP/UTP cable with a crimped-on RJ45 connector. A connecting guide and more additional info is available in the article about [[en:automation:02-glossary:1wire-hidden#wire_bus_on_unipi_devices|1-Wire bus and connection of our sensors]].