====== Mervis on Unipi Edge ======
By default, each Edge unit comes with a pre-uploaded newest Base OS image. To use the Mervis, you will need to upload Mervis OS image to the controller and install the Mervis IDE. 
  * Download the [[en:hw:004-edge:05-downloads:01-mervis|ZIP archive with the OS image]] and extract it into a new folder in your PC. 

<WRAP group center round box 95%>
{{ :files:img_warning-line_b.png?nolink |}}
<WRAP half column 13%>
{{ :en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(!)}}
</WRAP>
<WRAP half column 83%>
**Note:** \\
This image is compatible with [[en:files:software:mervis:]] from version 2.6.5 (177925).
</WRAP>
</WRAP>

{{section>en:hw:004-edge:04-image:flash-hidden#flashing_the_os_using_the_service_interface}}

{{section>en:hw:004-edge:04-image:flash-hidden#flashing_the_os_using_a_usb_flashdisk}}

{{page>en:sw:01-mervis:installation-of-mervis-hidden}}

----

You can continue with creating Your first project in the article [[en:sw:01-mervis:creating-new-project-hidden|]].