====== Installation guides for older systems ======
===== Node-RED for Unipi Axon (OLD) =====
This manual will guide you through the entire process of installing Node-RED into your Axon unit. Before the installation please make sure your unit was delivered undamaged and without any visible defects.
;;#
Axon
;;#
To install Node-RED you need to re-flash the current OS in the unit by a new one. This specific OS containing preinstalled Node-RED software is available in the [[en:files:software:os-images:00-start#axon_node-red_os|OS images]], chapter **Axon Node-RED OS**. Download it and extract it into a new folder in your PC.
{{page>en:hw:01-axon:image:flash-hidden}}
{{page>pre-installed-sw-hidden}}
{{page>connection-to-plc-hidden}}
{{page>securing-nodered-hidden}}
{{page>axon-neuron-flow-hidden}}
===== Node-RED for Unipi Edge =====
This manual will guide you through the entire process of installing Node-RED into your Edge unit.
On Unipi Edge, the Base OS is pre-installed as a default SW. This system does not include Node-RED, but it is possible to install Node-RED on to prepared OS.
{{ :files:img_warning-line_b.png?nolink |}}
{{ :en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(!)}}
**Note:** \\
This article contains installation of Node-RED with API [[https://kb.unipi.technology/cs:sw:02-apis:01-evok|Evok]].
Evok is not a mandatory part of the installation, but it can simplify the access to I/O on Unipi Edge.
Evok can be omitted, if access to I/O is not needed.
{{ :files:img_warning-line_b.png?nolink |}}
{{ :en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(!)}}
**Note:** \\
To make sure you have the latest version of Base OS, upload the OS according to the [[en:hw:004-edge:04-image:flash-hidden|Upload/backup OS]] guide.
Image with Base OS can be found in [[en:hw:004-edge:03-download-image:03-base|OS images]] section under Unipi Edge.
{{page>install-nodered-hidden}}
{{page>connection-to-edge-hidden}}
{{page>install-packages-hidden}}
===== Node-RED for Unipi Gate (OLD) =====
This manual will guide you through the entire process of installing Node-RED into your Unipi Gate.
;;#
Gate
;;#
On Unipi Gate, the Node-RED is pre-installed as a default SW, making re-flashing of the original system unnecessary. Base Os is preinstalled. However, if you want to be sure you have the latest version, upload the OS according to the guide below. OS image with the preinstalled Node-RED SW is available in [[en:hw:025-gate:download-image:02-nodered-old-hidden|OS images archive]] section, chapter **Gate Node-RED OS**. Download it and extract it into a new folder in your PC.
{{page>en:hw:025-gate:image:flash-hidden}}
{{page>pre-installed-sw-gate-hidden}}
{{page>connection-to-gate-hidden}}
{{page>en:automation:securing-os-ssh-hidden}}
{{page>securing-nodered-hidden}}
===== Node-RED for Unipi Neuron (OLD) =====
This manual will guide you through the entire process of installing Node-RED into your Neuron unit. Before the installation please make sure your unit was delivered undamaged and without any visible defects.
;;#
Neuron
;;#
{{page>en:sw:03-3rd-party:nodered:preparation-of-sd-card-hidden}}
{{page>en:hw:neuron-flash-hidden}}
{{page>en:files:software:tools:advanced-ip-scan-hidden}}
{{page>pre-installed-sw-hidden}}
{{page>connection-to-plc-hidden}}
{{page>securing-nodered-hidden}}
{{page>axon-neuron-flow-hidden}}
===== Node-RED for Unipi Patron (OLD) =====
This manual will guide you through the entire process of installing Node-RED into your Patron unit. Before the installation please make sure your unit was delivered undamaged and without any visible defects.
;;#
Patron
;;#
To install Node-RED you need to re-flash the current OS in the unit by a new one. This specific OS containing preinstalled Node-RED software is available in the [[en:files:software:os-images:00-start#patron_node-red_os|OS images]], chapter **Patron Node-RED OS**. Download it and extract it into a new folder in your PC.
{{page>en:hw:007-patron:image:flash-hidden}}
{{page>pre-installed-sw-hidden}}
{{page>connection-to-plc-hidden}}
{{page>securing-nodered-hidden}}
{{page>axon-neuron-flow-hidden}}
===== Node-RED for Unipi 1.1 (OLD) =====
This manual will guide you through the entire process of installing Node-RED into your Unipi 1.1 unit. Before the installation please make sure your unit was delivered undamaged and without any visible defects.
;;#
Unipi 1.1
;;#
{{page>en:sw:03-3rd-party:nodered:preparation-of-sd-card-hidden}}
{{page>en:hw:unipi11-flash-hidden}}
{{page>en:files:software:tools:advanced-ip-scan-hidden}}
{{page>pre-installed-sw-hidden}}
{{page>connection-to-plc11-hidden}}
{{page>securing-nodered-hidden}}
{{page>unipi11-flow-hidden}}