====== Node-RED for Unipi Patron====== This manual will guide you through the entire process of installing Node-RED into your Patron unit. Before the installation please make sure your unit was delivered undamaged and without any visible defects. ;;# Patron ;;# To install Node-RED you need to re-flash the current OS in the unit by a new one. This specific OS containing preinstalled Node-RED software is available in the [[en:files:software:os-images:00-start#patron_node-red_os|OS images]], chapter **Patron Node-RED OS**. Download it and extract it into a new folder in your PC. {{page>en:hw:007-patron:image:flash-hidden}} {{page>pre-installed-sw-hidden}} {{page>connection-to-plc-hidden}} {{page>securing-nodered-hidden}} {{page>axon-neuron-flow-hidden}}