Gate
This section contains all technical details related to Unipi Gate, including the storage, installation and working conditions.
| Terminal marking | Meaning |
|---|---|
| VCC | Power terminal - positive pole |
| GND | Power terminal - negative pole |
| RS485-A/RS485-B | RS-485 communication line terminals |
| RS485-END | Connectable terminating resistor of RS-485 communication line |
| ETH | Ethernet port |
| SERVICE | Service button |
| Control type by purpose | Operating control |
| Control type by design | Independently mounted control |
| Working temperature | Temperature: 0 °C .. +55 °C Humidity: 10 % .. 95 %, w/o aggressive substances, condensing vapours or fog |
| Storage conditions | Temperature: -25 °C .. +70 °C Humidity: 10 % .. 95 %, w/o aggressive substances, condensing vapours or fog |
| Ingress protection (IEC 529) | IP20 |
| Working position | Vertical, horizontal |
| Installation | To a 35 mm DIN rail in an electrical distribution box, optionally on a electrical distribution box mounting plate |
| Altitude | up to 2000 m |
| EMC immunity zone | B (IEC 61000-6-2 compliant) |
| Protection class | III |
| Overvoltage category | II |
| Pollution degree | 2 |
| Software function class | A |
| Control function class | A |
| Reverse polarity protection | Yes |
| Operating voltage range | 9-30 V⎓ |
| Power consumption | Max. 12 W |
| Power supply wire gauge | see Connectors |
| Connector purpose | For power supply | RS-485 |
|---|---|---|
| Connector model | xinya XY2500F-B | DEGSON 15EDGK-3.81 |
| Min. wire gauge | 0.75 mm2 (AWG18) | 0.5 mm2 (AWG20) |
| Max. Wire gauge | 2.5 mm2 (AWG14) | 1.5 mm2 (AWG16) |
| Terminal pitch | 5.08 mm | 3.81 mm |
| Terminal tightening torque | Max. 0.4 Nm | Max. 0.4 Nm |
| Connection | Pluggable terminal blocks | Pluggable terminal blocks |
| Dimensions (W x H x D) | 35 × 94 × 70 mm (depending on working position 2 or 4 DIN modules) |
| Weight | approx. 140 g |
| Thickness between device and DIN rail | 3.5 mm |
| Holder weight | 61 g |
| Holder material | Aluminium |
| Holder screws (included) | 3x M3x5, flat head |
| Terminals | RS485-A, RS485-B |
| Galvanic isolation | Yes (Basic) |
| Isolation voltage | 1000 V |
| ESD protection | ±15 kV |
| Communication speeds | 2400 bps 4800 bps 9600 bps 19200 bps 38400 bps 57600 bps 115200 bps |
| Input impedance | 12 kΩ |
| Input voltage hysteresis | 70 mV |
| Output characteristic | ±2.5 V |
| Terminating resistor | Built-in attachable 120 Ω (RS485-END) |
| RS485 pull-up / pull-down resistors | 560 Ω / 560 Ω |
| Ethernet port ETH0 | 10/100 Mbit/s |
| Ethernet port ETH1 | 10/100/1000 Mbit/s |
| USB port | USB 3.0 (for service) |
| Ext. memory storage | Micro SD (max. 128 GB) |
| FID G1xx | RAM | eMMC | CPU | |
|---|---|---|---|---|
| 1.0 & 1.1 | 0.5 GB / DDR3 | 16 GB | 600 MHz | |
| 1.2 | 0.5 GB / DDR3 | 16 GB | 600 MHz | |
| 1.0 | 1 GB / DDR3 | 16 GB | 600 MHz | |
| 2.0 | 1 GB / DDR4 | 32 GB | 600 MHz |