!!! ATTENTION !!!!
Booting this image invokes unconditional cleaning content of eMMC storage on your UniPi G1 gateway.
The operating system, deployed Mervis solution and any other configuration WILL BE LOST.

Installation via USB flash drive:
USB flash must be formated with first primary partition type FAT32, free size min 250MB.
You don't need to delete usb storage content. Just copy all files to root directory 
of USB flash. 

time   step
 -1s    1. Insert into USB slot, press and hold the service button
  0s    2. Power on device
  ..    3. Wait 5-10 seconds until both rows of LEDs start flashing alternatively
 10s    4. Release the button
        5. Wait up to two minutes for completion of the flashing procedure
125s    6. Both rows of LEDs will dim and the PLC is restarted
140s    7. Fresh system is running

For more information follow our tutorials on http://kb.unipi.technology
