Differences

This shows you the differences between two versions of the page.

--- en:automation:02-glossary:analog-inputs-hidden [2020/08/20 11:02] – mkudlacek
+++ en:automation:02-glossary:analog-inputs-hidden [2025/10/10 11:11] (current) – added edge ofojt
@@ Line 2: / Line 2: @@
 Analog inputs (AI) are for measuring analog values such as DC voltage, current and resistance. These values are produced by sensors which indicate multiple states such as thermometers, tensometers, distance meters, lux meters etc.
+----
+<html><span class="kbBlueText">More information about analog inputs can be found in specific categories:</span></html>\\
+<tile>
+| en:hw:004-edge:02-description-of-io:04-description-of-ai    | Edge               | :en:hw:unipi-kb-icon-edge.png       |
+| en:hw:007-patron:description-of-io:04-description-of-ai     | Patron             | :en:hw:unipi-kb-icon-patron.png     |
+| en:hw:01-axon:description-of-io:04-description-of-ai        | Axon               | :en:hw:unipi-kb-icon-axon.png       |
+| en:hw:02-neuron:description-of-io:04-description-of-ai      | Neuron             | :en:hw:unipi-kb-icon-neuron.png     |
+| en:hw:03-unipi11:description-of-io:04-description-of-ai     | 1.1 & 1.1 Lite     | :en:hw:unipi-kb-icon-1.png          |
+| en:hw:04-extensions:description-of-io:04-description-of-ai  | Extension modules  | :en:hw:unipi-kb-icon-extension.png  |
+</tile>
+/*
 ===== Analog inputs on Neuron and Axon =====
 The functionality of AIs on Neuron and Axon is different on Group 1 and Group 2/3 and Neuron extensions.
@@ Line 21: / Line 36: @@
 Changing between modes depends on the [[en:sw:00-start|software]] you are using, please follow the relevant tutorial.
-/*
 ==== Measuring voltage ====
 ==== Measuring current ====
-*/
 ===== Analog inputs on Unipi 1.1 =====
 The Unipi 1.1 has two analog inputs and they are only capable of measuring voltage in a range of 0-10V DC.
@@ Line 41: / Line 56: @@
 <WRAP center round alert 60%>
-For R_sens >= 200ohm, use R_ref = 1k
+For R_sens >= 200ohm, use R_ref = 1k. For R_sens < 200ohm, use R_ref = 10k
-For R_sens < 200ohm, use R_ref = 10k
 </WRAP>
-The value at the AI is calculated from the voltage you read from the AI (Vai)
+The value at the AI is calculated from the voltage you read from the AI (V_ai)
              Vcc - V_ai     R_ref * R_ai
@@ Line 51: / Line 65: @@
                 V_ai        R_ref + R_ai
-The ```Vcc``` is the applied voltage (12V in the picture above).
+The Vcc is the applied voltage (12V in the picture above).
+*/