Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:automation:ups-meanwell-12v-hidden [2021/11/10 08:35] – avsetulaen:automation:ups-meanwell-12v-hidden [2025/09/23 14:32] (current) – added Edge ofojt
Line 7: Line 7:
 <WRAP group> <WRAP group>
 <WRAP half column 81%> <WRAP half column 81%>
-The following tutorial describes how to connect Unipi units with the Meanwell DRC-60A power supply, which allows the output power to be backed up using a 12 V battery. It is also necessary to stabilize the power supply's output voltage using a DC/DC converter.+The following tutorial describes how to connect Unipi units with the Mean Well DRC-60A power supply, which allows the output power to be backed up using a 12 V battery. It is also necessary to stabilize the power supply's output voltage using a DC/DC converter.
  
 This power supply is used to supply power, but also to charge and maintain the charged battery. It can be operated, subject to the conditions described below, with all Unipi units and other selected Unipi equipment. In the event of a mains power failure, the power supply switches seamlessly to battery power mode. This achieves an uninterruptible power supply. This power supply is used to supply power, but also to charge and maintain the charged battery. It can be operated, subject to the conditions described below, with all Unipi units and other selected Unipi equipment. In the event of a mains power failure, the power supply switches seamlessly to battery power mode. This achieves an uninterruptible power supply.
Line 14: Line 14:
 <WRAP half column 15%> <WRAP half column 15%>
 ;;# ;;#
 +<html><span class="dev-tag dev-edge">Edge</span></html> \\
 <html><span class="dev-tag dev-patron">Patron</span></html> \\ <html><span class="dev-tag dev-patron">Patron</span></html> \\
 <html><span class="dev-tag dev-neuron">Neuron</span></html> \\ <html><span class="dev-tag dev-neuron">Neuron</span></html> \\
Line 27: Line 28:
 === Elements used === === Elements used ===
   * Wires of different colours (Cu, 0.5mm2)   * Wires of different colours (Cu, 0.5mm2)
-  * Switched power supply Meanwell DRC-60A with UPS function +  * Switched power supply Mean Well DRC-60A with UPS function 
-  * DC/DC converter Meanwell DDR-15G-24+  * DC/DC converter Mean Well DDR-15G-24
   * Any 12 V⎓ acid-lead battery (e.g. CSB GP12170 12V/17Ah)   * Any 12 V⎓ acid-lead battery (e.g. CSB GP12170 12V/17Ah)
   * Unipi Patron S207 unit   * Unipi Patron S207 unit
Line 34: Line 35:
  
 ===== Description of the devices used =====  ===== Description of the devices used ===== 
-The **DRC-60A** power supply can be supplied with an input voltage of 110 / 230 V~. The power supply's output can achieve a maximum voltage of 13.8 V⎓ with a maximum current of 4.3 A. In combination with a suitable voltage regulator (DC/DC converter), it is ideal for powering all Unipi units from the Patron, Neuron, Axon, and Unipi 1.1 product lines. The DRC-60A itself, without the converter, can be used to power Unipi Gate product line devices, as it can be powered with voltages in the 9–30 V⎓ range. For S-size units, the **DDR-15G-24** converter can be used. For M and L sizes, the **DDR-30G-24** should be used. Unipi 1.1 needs to be powered with 5 V⎓, so a suitable choice is e.g. **DDR-15G-5**.+The **DRC-60A** power supply can be supplied with an input voltage of 110 / 230 V~. The power supply's output can achieve a maximum voltage of 13.8 V⎓ with a maximum current of 4.3 A. In combination with a suitable voltage regulator (DC/DC converter), it is ideal for powering all Unipi units from the Patron, Neuron, Axon, and Unipi 1.1 product lines. The DRC-60A itself, without the converter, can be used to power Unipi Gate product line devices, as it can be powered with voltages in the 9–30 V⎓ range. For S-size units, the **DDR-15G-24** converter can be used. For Unipi Edge and M and L sizes, the **DDR-30G-24** should be used. Unipi 1.1 needs to be powered with 5 V⎓, so a suitable choice is e.g. **DDR-15G-5**.
  
 The power supply powers the connected load (Unipi unit) and simultaneously charges and maintains the battery. The total output current of the power supply is up to 4.3 A, of which 1.5 A is reserved for charging the battery and 2.8 A for the load at the output. The power supply powers the connected load (Unipi unit) and simultaneously charges and maintains the battery. The total output current of the power supply is up to 4.3 A, of which 1.5 A is reserved for charging the battery and 2.8 A for the load at the output.
Line 48: Line 49:
  
 ==== Wiring diagram ==== ==== Wiring diagram ====
-{{ :en:automation:ups_meanwell_scheme.png?direct |}}+{{ :en:automation:ups_meanwell_scheme_12v.png?direct |}}
 ;#; ;#;
 //Fig.1 - Wiring diagram of DRC-60A, DDR-15G-24, CSB GP12170 and Unipi Patron S207// //Fig.1 - Wiring diagram of DRC-60A, DDR-15G-24, CSB GP12170 and Unipi Patron S207//
Line 60: Line 61:
   * The second contact of the **Bat.Low** signal relay is connected to digital input **DI1** and the second contact of the **AC OK** relay is connected to **DI2**.   * The second contact of the **Bat.Low** signal relay is connected to digital input **DI1** and the second contact of the **AC OK** relay is connected to **DI2**.
   * Before connecting the battery, the maximum output voltage of the power supply must first be set using the **+V ADJ** trimmer. The voltage must match the holding voltage of the battery, in the case of our wiring the voltage is set to 13.7 V⎓.   * Before connecting the battery, the maximum output voltage of the power supply must first be set using the **+V ADJ** trimmer. The voltage must match the holding voltage of the battery, in the case of our wiring the voltage is set to 13.7 V⎓.
-  * The negative terminal of the battery is connected to the **-Bat.** power supply terminal. The positive terminal is connected to the **+Bat.**.+  * The negative terminal of the battery is connected to the **-Bat.** power supply terminal and the positive terminal is connected to the **+Bat.**.
   * Finally, connect the conductors (**⏚**, **N**, **L**) to the respective terminals of the power supply.   * Finally, connect the conductors (**⏚**, **N**, **L**) to the respective terminals of the power supply.
  
Line 78: Line 79:
  
 ==== Documentation ==== ==== Documentation ====
-  * {{ :en:automation:ups_meanwell_drc-60.pdf |MeanWell DRC-60A - datasheet}} +  * {{ :en:automation:ups_meanwell_drc-60.pdf |Mean Well DRC-60A - datasheet}} 
-  * {{ :en:automation:ups_meanwell_ddr-15.pdf |MeanWell DDR-15G-24 - datasheet}}+  * {{ :en:automation:ups_meanwell_ddr-15.pdf |Mean Well DDR-15G-24 - datasheet}}
   * [[cs:files:products:00-start|Documentation for HW Unipi]]   * [[cs:files:products:00-start|Documentation for HW Unipi]]
  
(Still can't find what you're looking for?)