Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
en:hw:01-axon:image [2019/09/18 13:13] jan_kozak [Flashing the OS using service web interface] |
en:hw:01-axon:image [2020/06/05 09:29] avsetula |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| ===== Flashing the OS using service web interface ===== | ===== Flashing the OS using service web interface ===== | ||
| - | - Download the [[https://kb.unipi.technology/files:software:os-images:00-start#axon_generation_os|zipped Axon OS image]] and unzip it into a new folder on your PC | + | - Download the [[files:software:os-images:00-start#axon_generation_os|zipped Axon OS image]] and unzip it into a new folder on your PC |
| - Press and hold the reset button located next to the upper row of connector labels | - Press and hold the reset button located next to the upper row of connector labels | ||
| - Power up the controller. The Axon will boot to the service mode (indicated by alternate flashing of lower and upper rows of LEDs). Release the reset button | - Power up the controller. The Axon will boot to the service mode (indicated by alternate flashing of lower and upper rows of LEDs). Release the reset button | ||
| Line 12: | Line 12: | ||
| ===== Flashing the OS using USB flash disk ===== | ===== Flashing the OS using USB flash disk ===== | ||
| - | - Download the [[https://kb.unipi.technology/files:software:os-images:00-start#axon_generation_os|zipped Axon OS image]] and unzip it into a new folder on your PC | + | - Download the [[files:software:os-images:00-start#axon_generation_os|zipped Axon OS image]] and unzip it into a new folder on your PC |
| - Prepare a USB flash disk with a capacity of at least 2 GB and a FAT32 partition | - Prepare a USB flash disk with a capacity of at least 2 GB and a FAT32 partition | ||
| - Copy the whole content of the ZIP archive to the flash disk | - Copy the whole content of the ZIP archive to the flash disk | ||
| - Insert the flash disk into the controller's USB2 port | - Insert the flash disk into the controller's USB2 port | ||
| - Press and hold the reset button located next to the upper row of connector labels | - Press and hold the reset button located next to the upper row of connector labels | ||
| - | - Power up the controller. The Axon will boot to the service mode (indicated by alternate flashing of lower and upper rows of LEDs. Keep holding the reset button | + | - Power up the controller. The Axon will boot to the service mode (indicated by alternate flashing of lower and upper rows of LEDs). Keep holding the reset button |
| - The controller will automatically start the reflashing process, indicated by progressive blinking of LEDs. You can now release the reset button | - The controller will automatically start the reflashing process, indicated by progressive blinking of LEDs. You can now release the reset button | ||
| - Once the LEDs stop blinking the reflash is completed. After that, the Axon will automatically reboot to its normal state | - Once the LEDs stop blinking the reflash is completed. After that, the Axon will automatically reboot to its normal state | ||
| Line 23: | Line 23: | ||
| <WRAP center round important 60%> | <WRAP center round important 60%> | ||
| Only the USB2 port can be used for reflashing. | Only the USB2 port can be used for reflashing. | ||
| + | </WRAP> | ||
| + | |||
| + | <WRAP center round info 60%> | ||
| + | In case the used flash disk is not compatible, Axon will boot to the Service mode and the progressive blinking of LEDs is not indicated. In this case it necessary to use different flash disk or the above mentioned Service web interface. | ||
| </WRAP> | </WRAP> | ||
