Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:hw:01-axon:lte [2023/07/11 14:58] avsetula |
en:hw:01-axon:lte [2023/07/11 15:09] (current) avsetula [Autoswitch feature] |
||
|---|---|---|---|
| Line 42: | Line 42: | ||
| Therefore, it is necessary to continually keep the metrics as positive non-zero values. This is ensured by a DHCP client when DHCP is active on the main network interface but **it must be assured manually if static IP is configured on the main interface** (as static routes have zero metrics as default). As an example, you can put a constant to the interface’s configuration file at ///etw/network/interfaces.d//. | Therefore, it is necessary to continually keep the metrics as positive non-zero values. This is ensured by a DHCP client when DHCP is active on the main network interface but **it must be assured manually if static IP is configured on the main interface** (as static routes have zero metrics as default). As an example, you can put a constant to the interface’s configuration file at ///etw/network/interfaces.d//. | ||
| - | Then, the ///etw/network/interfaces.d/**eth0**// file for static IP configuration may look like: | + | Then, the ///etc/network/interfaces.d/**eth0**// file for static IP configuration may look like: |
| <code> | <code> | ||
| # Example static IP configuration for unit belonging to LAN | # Example static IP configuration for unit belonging to LAN | ||
