This is an old revision of the document!
LTE
Quick-start guide
This manual refers to the LTE series of Axon units (currently S165, M565 and M265).
- Insert micro-sim supporting LTE data into the slot.
- Log-in to the controller via SSH (or SCP) and edit file /etc/unipi-lte.conf. APN setting is mandatory (LTE service is turned off if this line in the file is missing or is commented). You can use built-in nano editor to do this. The APN parameter should be provided by your network operator.
- In the same way, set the PIN parameter if SIM is PIN-protected.
- Restart your controller. Be patient, registration to the mobile network can take tens of seconds. When registered, NET LED lights up.
- During normal operation, “Mobile network” LED indicators SIM, NET, INT shloud be ON while blinking SIG indicates signal strength.
- In case of any problem, check the syslog for more info (you can use grep command to filter messages from the unipilte service).