Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:hw:02-neuron:gsm [2021/06/22 09:20]
avsetula created
en:hw:02-neuron:gsm [2021/08/10 12:13] (current)
avsetula [Užitečné tipy]
Line 1: Line 1:
 ====== GSM models ====== ====== GSM models ======
 +<WRAP group 100%>
 +<WRAP half column 81%>
 +<WRAP center round info 90%>
 +Are you looking for instructions for sending SMS from **Mervis IDE**? Continue [[en:​sw:​01-mervis:​sending-sms-hidden|with this tutorial]].
 +</​WRAP>​
 +</​WRAP>​
 +<WRAP half column 15%>
 +;;#
 +<​html><​span class="​dev-tag dev-neuron">​Neuron</​span></​html>​
 +;;#
 +</​WRAP>​
 +</​WRAP>​
  
 +{{ :​cs:​hw:​02-neuron:​unipi-s103g-comp.jpg?​nolink |}}
 +
 +
 +===== Quectel M66 =====
 +Thanks to the GSM network connection **Quectel M66** modem allows you to send or receive SMS messages. It can also be used for GPRS connection to the Internet.
 +
 +|< 100% 35% 65% >|
 +| GSM/GPRS class        | 10                     |
 +| GSM frequency bands   | 850/​900/​1800/​1900 MHz  |
 +| SIM card type         | MiniSIM (15 × 25 mm)   |
 +| GSM/GPRS antenna ​     | 2 dBi - SMA            |
 +
 +This modem is the successor to the FIBOCOM G510, which was used in the older versions of Neuron S103-G. The Quectel M66 modem uses **the same set of AT commands**, so the software written for the FIBOCOM G510 is also compatible with this new Quectel M66 modem. The only difference is that the serial link has a factory setting for communication speed different.
 +
 +
 +==== Neuron S103-G ====
 +The Unipi Neuron S103-G unit is equipped with the Quectel M66 GSM/GPRS module and a MiniSIM card slot. This allows the unit to connect to a GSM network and sending notifications,​ or status messages, or receiving requests via SMS. If properly configured, it is also possible to use GPRS to connect to the Internet.
 +
 +The modem is available on the serial line **[[en:​hw:​02-neuron:​portmap|ttyAMA0]]**.
 +
 +//**Note:** GPRS communication is not natively supported in Mervis software.// ​
 +
 +
 +==== OEM ====
 +As part of the custom production, it is possible to mount the Quectel M66 modem in other Unipi units from the [[en:​hw:​02-neuron|Neuron]] and [[en:​hw:​007-patron|Patron]] production line when ordering a larger number of units.
 +
 +If you are interested in custom production, do not miss [[https://​www.unipi.technology/​products/​neuron-patron-oem-solutions-92|this article on OEM products]]. If you decide on custom production, contact our [[https://​www.unipi.technology/​contacts|sales department]].
 +
 +
 +===== Useful tips =====
 +  * An internal GSM antenna is included in each package of the Neuron unit with the GSM module. In case of signal quality problems, it is advisable to use an **external antenna** installed in an open space (i.e. outside the switchboard). You can choose between an antenna with a magnetic mount and a larger wall antenna. Both types of an antenna can be purchased [[https://​www.unipi.technology/​others-c42|in our e-shop]].
 +  * It is not recommended to use the internal Wi-Fi and GSM/GPRS interface at the same time.
 +  * Instructions for setting up GPRS communication can be found e.g. [[https://​wiki.archlinux.org/​title/​3G_and_GPRS_modems_with_pppd|at this link]].
 +  ​
 +~~NOTOC~~ ​