Differences

This shows you the differences between two versions of the page.

--- en:hw:02-neuron [2021/04/14 08:18]
jan_kozak [Model overview]
+++ en:hw:02-neuron [2022/10/18 09:45] (current)
avsetula [Computing module (SBC)]
@@ Line 2: / Line 2: @@
 {{ :en:hw:neuron_m103-top.jpg?direct |}}
-Unipi Neuron is a modular **programmable logic controller (PLC) product line** designed for control, regulation and monitoring of smart building systems, HVAC (Heating, Ventilation, Air Conditioning) systems and both home and industrial automation systems. Thanks to its modular architecture and compact design, the Neuron represents a highly flexible and affordable solution for the quickly expanding field of smart technology. Customers can also utilize the Neuron for smart energy management to achieve better energy efficiency and reduce expenses.
+Unipi Neuron is a modular **programmable logic controller (PLC)** product line designed for control, regulation and monitoring of smart building systems, HVAC (Heating, Ventilation, Air Conditioning) systems and both home and industrial automation systems. Thanks to its modular architecture and compact design, the Neuron represents a highly flexible and affordable solution for the quickly expanding field of smart technology. Customers can also utilize the Neuron for smart energy management to achieve better energy efficiency and reduce expenses.
 ===== Hardware description =====
 {{:en:hw:s103gs_eng-01.jpg?direct|}}
-Depending on the model, Neuron controllers feature 1-3 sections. See [[#sizes_and_sections|below]] for more info.
+Depending on the model, Neuron units feature 1-3 sections. See [[#sizes_and_sections|below]] for more info.
 **Each I/O circuit board is controlled by its STM32 processor**, which controls inputs and outputs and communicates with the central processing unit (CPU). Processors are using custom firmware containing not only basic I/O functions but also additional functions and features.
@@ Line 13: / Line 13: @@
-==== CPU ====
+==== Computing module (SBC) ====
-Standard Neuron models are using an integrated Raspberry Pi 3 Model B as a computing module. The [[https://www.unipi.technology/unipi-neuron-s103-raspberry-pi-4-p364|S103 (Raspberry Pi 4)]] features an integrated Raspberry Pi 4 Model B. The following table compares the technical parameters of both options:
+The unit is available with a Raspberry Pi 3 Model B+ computing module, or a Raspberry Pi 4 Model B with an optional capacity (2, 4 or 8 GB) of operating memory. This allows you to choose the exact configuration so the controller would meet all your requirements.
+The following table compares the technical parameters of both options:
 ^  Comparison of the available computing modules  ^^^
-^ Type                    ^  Raspberry Pi 3 Model B^  Raspberry Pi 4 Model B^
+^ Type                    ^  Raspberry Pi 3 Model B(+)^  Raspberry Pi 4 Model B^
-| CPU                     |              4x 1,2 GHz|              4x 1,5 GHz|
+| CPU                     |              4× 1.2 GHz|              4× 1.5 GHz|
 | Operating memory        |                    1 GB|       2 GB / 4 GB / 8GB|
 | Ethernet                |             10/100 Mbit|                  1 Gbit|
-| USB                     |              4x USB 2.0|  2x USB 2.0, 2x USB 3.0|
+| USB                     |              4× USB 2.0|  2× USB 2.0, 2× USB 3.0|
-| HDMI                    |                 1x HDMI|           2x micro-HDMI|
+| HDMI                    |                 1× HDMI|           2× micro-HDMI|
 | Wireless communication  |    Wi-Fi, Bluetooth 4.1|   Wi-Fi , Bluetooth 5.0|
-| Available in            |  [[https://www.unipi.technology/neuron-c2|All Neuron models]]|  [[https://www.unipi.technology/unipi-neuron-s103-raspberry-pi-4-p364|S103 (Raspberry Pi 4) model]]|
-<WRAP center round info 60%>
+<WRAP center round info 80%>
-The exact type of Raspberry Pi used can be determined by checking the product's version on its manufacturer sticker:
+**The exact type of Raspberry Pi computing module can be determined by the FID parameter, which is indicated on the manufacturer label:**
-  * version 2.x = Raspberry Pi 3 Model B
+  * FID 2.x = Raspberry Pi 3 Model B
-  * version 3.x = Raspberry Pi 3 Model B+
+  * FID 3.x = Raspberry Pi 3 Model B+
-  * version 4.x = Raspberry Pi 4 Model B
+  * FID 4.2 = Raspberry Pi 4 Model B (2GB RAM)
+  * FID 4.4 = Raspberry Pi 4 Model B (4GB RAM)
+  * FID 4.8 = Raspberry Pi 4 Model B (8GB RAM)
 </WRAP>
@@ Line 50: / Line 53: @@
 <WRAP center round important 95%>
-**HDMI port on Unipi Neuron controllers** is intentionally sealed, as using the graphic chip can cause system instability (issues with the used software or overheating). Some HDMI displays can damage the controller just by connecting to it (eg. due to the ground potential difference). **Removing the HDMI seal renders the controller's warranty null and void**.
+**HDMI port on Unipi Neuron units** is intentionally sealed, as using the graphic chip can cause system instability (issues with the used software or overheating). Some HDMI displays can damage the unit just by connecting to it (eg. due to the ground potential difference). **Removing the HDMI seal renders the unit's warranty null and void**.
 <html><span class="avOrangeText">As a solution, you can use external displays: </span></html> \\
@@ Line 65: / Line 68: @@
 Each Neuron also features a **single 1-Wire bus** for the passive reading of data from corresponding 1-Wire sensors (humidity sensors, temperature sensors etc.). One bus can receive data from up to 15 sensors at once (provided a suitable 1-Wire hub is used).
-As the Unipi Neuron product line is based on the Raspberry Pi, all Neuron controllers feature **up to 4 USB ports**. These ports can be used for connecting various USB convertors, external memory drives etc. We do not recommend using them to power external devices.
+As the Unipi Neuron product line is based on the Raspberry Pi, all Neuron units feature **up to 4 USB ports**. These ports can be used for connecting various USB convertors, external memory drives etc. We do not recommend using them to power external devices.
-==== Sizes and sections ====
+===== =====
 {{page>size-of-unipi-hidden}}
-===== Model overview ======
+===== Current models overview ======
-{{:cs:hw:tabulka-neuron-en.png?direct|}}
+{{:en:hw:tabulka-neuron-en.png?direct|}}
 //**Explanation**//
-  - //Powered by Raspberry Pi 4 Model B//
   - //GSM/GPRS module//
@@ Line 87: / Line 88: @@
   * [[en:sw:01-mervis:running-on-neuron-hidden|Mervis on Unipi Neuron]]
   * [[en:sw:01-mervis:creating-new-project-hidden|First project with Unipi Neuron]]
+  * [[en:files:products:02-neuron|Documentation for Neuron units]]
 </WRAP>
 <WRAP half column>
+  * [[en:hw:02-neuron:01-first-steps|]]
   * [[en:hw:02-neuron:description-of-io|]]
+  * [[en:hw:02-neuron:download-image|]]
+  * [[en:hw:02-neuron:gsm|]]
   * [[en:hw:02-neuron:image|]]
+  * [[en:hw:02-neuron:led-indication|]]
   * [[en:hw:02-neuron:portmap|]]
   * [[en:hw:03-unipi11:suitable-sd-card|]]