Differences

This shows you the differences between two versions of the page.

--- en:hw:025-gate:service-mode [2021/01/18 13:30]
jan_kozak
+++ en:hw:025-gate:service-mode [2021/08/09 13:21] (current)
avsetula
@@ Line 2: / Line 2: @@
 <WRAP group 100%>
 <WRAP half column 81%>
-This mode serves for uploading or backing up the operating system, or for restoring access to the PLC (restoring the default password via OS reflash, changing the network configuration or enabling/disablíng the SSH access). Only the service web interface is available in this mode, all remaining PLC functions are disabled. This mode does not publish mDSN logs.
+This mode serves for uploading or backing up the operating system, or for restoring access to the device (restoring the default password via OS reflash, changing the network configuration or enabling/disablíng the SSH access). Only the service web interface is available in this mode, all remaining device functions are disabled. This mode does not publish [[en:hw:025-gate:01-first-steps#mdns_record|mDNS record]].
 </WRAP>
 <WRAP half column 15%>
@@ Line 12: / Line 12: @@
 ===== Startup in a service mode =====
-The service mode is accessed using the **SERVICE** button located above the red LED on the Unipi Gate device front plate. As the device's Ethernet ports work in bridge mode (br0 = ETH0 + ETH1) when the device is in the service mode, the ports should never be connected into the same network.
+The service mode is accessed using the **SERVICE** button located above the red LED on the Unipi Gate device front plate. As the device's Ethernet ports work in bridge mode (br0 = ETH0 + ETH1) when the device is in the service mode, the ports should never be connected into the same network. The mode is physically indicated by the PWR diode continously emitting with the remaining LEDs blinking ([[en:hw:025-gate:led-indication#pwr_is_on_the_rest_is_blinking_600ms|demonstration here]] / [[en:hw:025-gate:led-indication#service_mode|startup simulator here]]).
 {{page>en:hw:025-gate:service-web-interface-hidden}}
@@ Line 23: / Line 23: @@
 <html><span class="kbBlueText">On the right side of the ribbon, there are two buttons:</span></html>
   - **Run shell** -> serves for access to a console with limited options (BusyBox)
-  - **Restart system** -> reboots the controller
+  - **Restart system** -> reboots the device
 ----
@@ Line 33: / Line 33: @@
     * Enable ssh -> enables SSH access on port 22 (SSH is enabled by default)
     * Disable ssh -> disables SSH access
-  - **Backup** -> contains the "Backup to USB flash" button which creates a OS back-up stored on a compatible USB flash disk (if inserted)
+  - **Backup** -> contains the "Backup to USB flash" button which creates an OS back-up stored on a compatible USB flash disk (if inserted)
   - **Software update** -> serves for uploading the OS into the device
-    * U
+    * A text field for uploading the **archive.swu** (containing the OS image) is placed directly under the window's label
-    * Přímo pod nadpisem okna můžete vidět oblast pro vložení souboru s obrazem OS **archive.swu**
+  - **Messages** -> displays a list of performed operations
-    * Pod touto oblastí máte ještě ukazatel stavu nahrávání / zálohování OS
+\\
-  - **Messages** -> slouží pro výpis prováděných operací
+<WRAP center round info 80%>
+If Mervis is used, the **Settings** dialogue window can contain 3 additional buttons.
+  * Enable Mervis -> launches Mervis RT on the device
+  * Disable Mervis -> stops Mervis RT on the device
+</WRAP>
 \\
 {{ :en:hw:gate_service_mode.png?direct |}}