Differences

This shows you the differences between two versions of the page.

--- en:hw:03-unipi11:description-of-io:01-description-of-di [2020/12/16 12:57] – jan_kozak
+++ en:hw:03-unipi11:description-of-io:01-description-of-di [2025/11/04 14:44] (current) – upadted the include ofojt
@@ Line 1: / Line 1: @@
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
 ====== Digital inputs ======
 /* zapojení DI */
 {{page>:en:hw:connection-of-di-11-hidden}}
+/* návodné videa pro použití svorek na Unipi 1.1 */
+{{page>en:hw:use-of-terminals-hidden}}
 ===== Special functions =====
-/* Úvod */
+/* Jumpery (#jumpers) */
-{{page>:en:hw:03-unipi11:special-function-info-hidden}}
+{{page>en:hw:special-function-jumper-hidden}}
+----
-/* CNT (#cnt) */
+/* DI13 a DI14 (#di13-14) */
-{{page>:en:hw:special-function-cnt-hidden}}
+{{page>en:hw:special-function-di13-14-hidden}}
-<WRAP center round info 95%>
+===== Reading the DI directly =====
-**Caution:** \\
-Counters on Unipi 1.1 and 1.1 Lite are reset when the power supply is unplugged. This function must be configured in the control SW. /* FIXME - odkázat na návod, kde je tento postup vysvětlen - nutno sepsat návod */
-</WRAP>
-/* Jumpery */
+/* Information about inverted logic on DI */
-{{page>:en:hw:special-function-jumper-hidden}}
+{{page>.:di-inverted-logic-hidden}}
 ===== Technical parameters =====