Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
en:hw:03-unipi11:description-of-io:03-description-of-ro [2021/01/15 12:36] avsetula |
en:hw:03-unipi11:description-of-io:03-description-of-ro [2022/07/11 13:52] avsetula [Relay outputs] |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| /* Úvodní popis RO na Unipi 1.1 / Lite */ | /* Úvodní popis RO na Unipi 1.1 / Lite */ | ||
| + | <WRAP group> | ||
| + | <WRAP half column 81%> | ||
| Relay outputs are terminated on terminals labelled by a switch schematic sign and serve for switching two-state devices with alternating or current voltage. The **COM** terminal is common, serving as input for switching voltage. **NO** and **NC** terminals are used as the switching voltage output. | Relay outputs are terminated on terminals labelled by a switch schematic sign and serve for switching two-state devices with alternating or current voltage. The **COM** terminal is common, serving as input for switching voltage. **NO** and **NC** terminals are used as the switching voltage output. | ||
| - | * NO - in the default state (no voltage), contacts are disengaged | + | * **NO** - in the default state (no voltage), contacts are **disengaged** |
| - | * NC - in the default state (no voltage), contacts are engaged | + | * **NC** - in the default state (no voltage), contacts are **engaged** |
| + | </WRAP> | ||
| + | <WRAP half column 15%> | ||
| + | ;;# | ||
| + | <html><span class="dev-tag dev-unipi11">Unipi 1.1</span></html> | ||
| + | ;;# | ||
| + | </WRAP> | ||
| + | </WRAP> | ||
| The state (On/Off) of each relay is indicated by a LED with a corresponding label. Overload and overvoltage protection should be provided externally by a circuit breaker (ideally one for each output). Nominal current and circuit breaker type should be selected according to the load and its characteristics concerning the maximum current on the output. | The state (On/Off) of each relay is indicated by a LED with a corresponding label. Overload and overvoltage protection should be provided externally by a circuit breaker (ideally one for each output). Nominal current and circuit breaker type should be selected according to the load and its characteristics concerning the maximum current on the output. | ||
| - | <WRAP center round info 95%> | + | <WRAP center round important 95%> |
| - | **Note:** \\ | + | **Warning:** \\ |
| If an inductive load is connected (eg. electric motors, relay coils, contactors or even the cables in extensive electric installations), we recommend protecting the relay outputs by a corresponding external element (eg. varistor, RC circuit or a suitable diode). | If an inductive load is connected (eg. electric motors, relay coils, contactors or even the cables in extensive electric installations), we recommend protecting the relay outputs by a corresponding external element (eg. varistor, RC circuit or a suitable diode). | ||
