Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
en:hw:03-unipi11 [2020/06/15 13:16]
avsetula [Features]
en:hw:03-unipi11 [2021/09/03 12:45]
avsetula [Further info]
Line 8: Line 8:
  
 {{:​en:​hw:​01-products:​03-unipi11:​1.1gs.png?​direct&​800|}} {{:​en:​hw:​01-products:​03-unipi11:​1.1gs.png?​direct&​800|}}
- 
-**User manual** 
-  * {{ :​en:​hw:​01-products:​03-unipi11:​fgncn3z4ug_manual-en_2_.pdf |UniPi 1.1 user manual}} 
  
 ==== Features ==== ==== Features ====
  
-  * 8x Finder 36.11.9.005.4011 changeover relays (rated for 250V AC/10A or 30V DC/10A+  * 8x Finder 36.11.9.005.4011 changeover relays (rated for 250 V~ 10 A or 30 V⎓ 10 A
-  * 12x galvanically isolated digital inputs (0-3.5 ​VDC voltage for logical 0 and 5-24 VDC voltage for logical 1, 5 ms minimum pulse lenght) +  * 12x galvanically isolated digital inputs (0-3.5 ​V⎓ voltage for logical 0 and 5-24 V⎓ voltage for logical 1, 5 ms minimum pulse lenght) 
-  * 2x 0-10V analog inputs +  * 2x 0-10 V⎓ analog inputs 
-  * 1x 0-10V analog output+  * 1x 0-10 V⎓ analog output
   * 1 × 1-Wire port for connection to 1-Wire thermometers and other sensors   * 1 × 1-Wire port for connection to 1-Wire thermometers and other sensors
   * 1 × I2C port for expansion   * 1 × I2C port for expansion
   * 1 × UART port for external serial communications   * 1 × UART port for external serial communications
   * socket for RTC (real-time clock) battery   * socket for RTC (real-time clock) battery
-===== UniPi 1.1 Lite =====+===== Unipi 1.1 Lite =====
 {{:​en:​hw:​1.1litegs.png?​direct&​300|}} {{:​en:​hw:​1.1litegs.png?​direct&​300|}}
  
-UniPi 1.1 Lite is a smaller and simpler variant of the UniPi 1.1, designed for smallest automation projects. When compared to the UniPi 1.1, it features fewer I/O's but is more compact and cheaper.+Unipi 1.1 Lite is a smaller and simpler variant of the Unipi 1.1, designed for smallest automation projects. When compared to the Unipi 1.1, it features fewer I/O's but is more compact and cheaper.
  
 ==== Features ==== ==== Features ====
  
-  * 6x Omron G5Q-14-EU changeover relays (rated for 250V AC/10A or 30V DC/5A+  * 6x Omron G5Q-14-EU changeover relays (rated for 250 V~ 10 A or 30 V⎓ 5 A
-  * 6x galvanically isolated digital inputs (0-3.5 ​VDC voltage for logical 0 and 5-24 VDC voltage for logical 1, 5 ms minimum pulse lenght)+  * 6x galvanically isolated digital inputs (0-3.5 ​V⎓ voltage for logical 0 and 5-24 V⎓ voltage for logical 1, 5 ms minimum pulse lenght)
   * 1 × 1-Wire port for connection to 1-Wire thermometers and other sensors   * 1 × 1-Wire port for connection to 1-Wire thermometers and other sensors
   * short circuit LED indication   * short circuit LED indication
Line 36: Line 33:
 ===== Overview ===== ===== Overview =====
  
-Unipi 1.1 controllers ​use Raspberry Pi computer as their computing module. Unipi 1.1 and Unipi 1.1 Lite board are compatible with the following Raspberry Pi models: ​+Unipi 1.1 use Raspberry Pi computer as their computing module. Unipi 1.1 and Unipi 1.1 Lite board are compatible with the following Raspberry Pi models: ​
   * Raspberry Pi 2 Model B   * Raspberry Pi 2 Model B
   * Raspberry Pi 3 Model B   * Raspberry Pi 3 Model B
Line 50: Line 47:
 The **1-Wire bus** is used for passive reading of data from corresponding 1-Wire sensors (humidity sensors, temperature sensors etc.). One bus can receive data from up to 15 sensors with a maximum total length of the bus up to 200 meters (provided a suitable [[https://​www.unipi.technology/​cs/​senzory-c11|1-Wire hub]] is used). The **1-Wire bus** is used for passive reading of data from corresponding 1-Wire sensors (humidity sensors, temperature sensors etc.). One bus can receive data from up to 15 sensors with a maximum total length of the bus up to 200 meters (provided a suitable [[https://​www.unipi.technology/​cs/​senzory-c11|1-Wire hub]] is used).
  
-**Note**: ​UniPi 1.1 and 1.1 Lite require an external ​5V 2.5A power source with 2.1mm DC jack. +**Note**: ​Unipi 1.1 and 1.1 Lite require an external ​5 V⎓ / 2.5 A power source with 2.1mm DC jack.  
 + 
 + 
 +===== Further info ===== 
 +<WRAP group> 
 +<WRAP half column>​ 
 +  * [[https://​www.unipi.technology/​unipi-1-1-c7|Unipi 1.1 & 1.1 Lite on Unipi e-shop]] 
 +  * [[en:​sw:​01-mervis:​running-on-neuron-hidden|]] 
 +  * [[en:​sw:​01-mervis:​creating-new-project-on-unipi11-hidden|]] 
 +  * [[en:​files:​products:​03-unipi_1|Documentation for Unipi 1.1 & 1.1 Lite]] 
 +</​WRAP>​
  
 +<WRAP half column>
 +  * [[en:​hw:​03-unipi11:​description-of-io|]]
 +  * [[en:​hw:​03-unipi11:​download-image|]]
 +  * [[en:​hw:​03-unipi11:​image|]]
 +  * [[en:​hw:​03-unipi11:​portmap|]]
 +  * [[en:​hw:​03-unipi11:​suitable-sd-card|]]
 +</​WRAP>​
 +</​WRAP>​