Differences

This shows you the differences between two versions of the page.

--- en:hw:03-unipi11 [2021/08/09 13:23]
avsetula
+++ en:hw:03-unipi11 [2021/09/03 12:45]
avsetula [Further info]
@@ Line 19: / Line 19: @@
   * 1 × UART port for external serial communications
   * socket for RTC (real-time clock) battery
-===== UniPi 1.1 Lite =====
+===== Unipi 1.1 Lite =====
 {{:en:hw:1.1litegs.png?direct&300|}}
-UniPi 1.1 Lite is a smaller and simpler variant of the UniPi 1.1, designed for smallest automation projects. When compared to the UniPi 1.1, it features fewer I/O's but is more compact and cheaper.
+Unipi 1.1 Lite is a smaller and simpler variant of the Unipi 1.1, designed for smallest automation projects. When compared to the Unipi 1.1, it features fewer I/O's but is more compact and cheaper.
 ==== Features ====
@@ Line 47: / Line 47: @@
 The **1-Wire bus** is used for passive reading of data from corresponding 1-Wire sensors (humidity sensors, temperature sensors etc.). One bus can receive data from up to 15 sensors with a maximum total length of the bus up to 200 meters (provided a suitable [[https://www.unipi.technology/cs/senzory-c11|1-Wire hub]] is used).
-**Note**: UniPi 1.1 and 1.1 Lite require an external 5 V⎓ / 2.5 A power source with 2.1mm DC jack.
+**Note**: Unipi 1.1 and 1.1 Lite require an external 5 V⎓ / 2.5 A power source with 2.1mm DC jack.
@@ Line 61: / Line 61: @@
 <WRAP half column>
   * [[en:hw:03-unipi11:description-of-io|]]
+  * [[en:hw:03-unipi11:download-image|]]
   * [[en:hw:03-unipi11:image|]]
+  * [[en:hw:03-unipi11:portmap|]]
   * [[en:hw:03-unipi11:suitable-sd-card|]]
 </WRAP>
 </WRAP>