Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:hw:04-extensions:led-indication [2025/03/12 09:31] – [Nesvítí žádná dioda] avsetulaen:hw:04-extensions:led-indication [2025/12/01 11:58] (current) – fixed wrong links to images and gifs ofojt
Line 1: Line 1:
 ====== LED indication ====== ====== LED indication ======
  
-<WRAP group 100%> +<WRAP group> 
-<WRAP half column 81%> +<WRAP half column 100%> 
-This article contains the description of LED indication and all device states of Extension modules. +#;; 
-</WRAP> +<html><style>h1 {margin-bottom: 10px !important;}</style><span class="tag-skelet inline-tag mobile-only"> 
-<WRAP half column 15%> +<span class="tag-extens">Extension</span> 
-;;# +</span></html> 
-<html><span class="dev-tag dev-extens">Extension</span></html> +#;;
-;;#+
 </WRAP> </WRAP>
 </WRAP> </WRAP>
 +
 +This article contains the description of LED indication and all device states of Extension modules.
 +
  
  
-===== Popis indikačních LED =====+===== Description of indications LEDs =====
  
 |< 100% 28% 14% 45% 13%>| |< 100% 28% 14% 45% 13%>|
Line 27: Line 29:
  
  
-===== Popis základních stavů modulu =====+===== Description of the individual device states =====
  
 The following chapters describe all LED states for the Extension modules: \\ The following chapters describe all LED states for the Extension modules: \\
Line 41: Line 43:
 {{ :files:img_warning-line_b.png?nolink |}} {{ :files:img_warning-line_b.png?nolink |}}
 <WRAP half column 13%> <WRAP half column 13%>
-[[safety-instructions#vyznam_bezpecnostnich_symbolu|{{:en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(i)}}]]+{{:en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(i)}}
 </WRAP> </WRAP>
 <WRAP half column 83%> <WRAP half column 83%>
Line 51: Line 53:
  
 ==== All LEDs are off ==== ==== All LEDs are off ====
 +<WRAP group>
 +<WRAP half column>
 <html><span class="kbBlueText">State: </span></html> <html><span class="kbBlueText">State: </span></html>
 <html><span class="kbBlueLightText">Power-Off</span></html>\\  <html><span class="kbBlueLightText">Power-Off</span></html>\\ 
Line 57: Line 61:
 The module power supply is unplugged. If the PWR LED does not change its state on the Extension module even after connecting the power supply, try another power supply. If the state does not change after replacing the power supply, it is likely that the unit has been damaged. In this case, please contact [[..:..:contact:00-start|technical support]].  The module power supply is unplugged. If the PWR LED does not change its state on the Extension module even after connecting the power supply, try another power supply. If the state does not change after replacing the power supply, it is likely that the unit has been damaged. In this case, please contact [[..:..:contact:00-start|technical support]]. 
  
-/* <WRAP group> +
-<WRAP half column>+
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_off.png?direct |}}+{{ :en:hw:04-extensions:xs54_off.png?direct |}} 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
-==== Svítí PWR ==== +==== PWR is On ==== 
-<html><span class="kbBlueText">Stav: </span></html> +<WRAP group> 
-<html><span class="kbBlueLightText">Zapnuto</span></html>\\ +<WRAP half column> 
 +<html><span class="kbBlueText">State: </span></html> 
 +<html><span class="kbBlueLightText">Power-On</span></html>\\ 
 /* Power-On */ /* Power-On */
  
-Modul je připojena k napájení. Pokud rozšiřující modul setrvá v tomto stavu déle než minutu beze změny je možné, že je poškozen. V tomto případě kontaktujte [[cs:contact:00-start|technickou podporu]].+The module is powered. If the Extension module remains in this state longer than a minute without change, it is possible that it is damage. In this case, please contact [[..:..:contact:00-start|technical support]]. 
  
-/* <WRAP group> 
-<WRAP half column> 
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_on.png?direct |}}+{{ :en:hw:04-extensions:xs54_on.png?direct |}} 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
-==== Svítí PWR a RUN pomalu bliká ==== +==== PWR is On and RUN blink slowly ==== 
-<html><span class="kbBlueText">Stav: </span></html> +<WRAP group> 
-<html><span class="kbBlueLightText">Nekomunikuje s I/O</span></html>\\ +<WRAP half column> 
 +<html><span class="kbBlueText">State: </span></html> 
 +<html><span class="kbBlueLightText">Does not communicate with I/O</span></html>\\ 
 /* Idle ; Nečinný ; does not communicate with I/O */ /* Idle ; Nečinný ; does not communicate with I/O */
  
Line 92: Line 97:
 <html><span class="kbBlueLightText">ON: 2000ms / OFF: 2000ms</span></html>\\ <html><span class="kbBlueLightText">ON: 2000ms / OFF: 2000ms</span></html>\\
  
-Nadřazený řídicí systém nekomunikuje s modulem.+The controller does not communicate with the module.
  
 <WRAP group center round box 95%> <WRAP group center round box 95%>
 {{ :files:img_warning-line_b.png?nolink |}} {{ :files:img_warning-line_b.png?nolink |}}
 <WRAP half column 13%> <WRAP half column 13%>
-[[safety-instructions#vyznam_bezpecnostnich_symbolu|{{:en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(i)}}]]+{{:en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(i)}}
 </WRAP> </WRAP>
 <WRAP half column 83%> <WRAP half column 83%>
-**Poznámka**: \\ +**Please note**: \\ 
-Jedná se také o výchozí stav při spuštění zařízení s výchozí konfigurací.+This is also the default state when the device is started with the default configuration.
 </WRAP> </WRAP>
 </WRAP> </WRAP>
  
-/* <WRAP group> 
-<WRAP half column> 
 </WRAP> </WRAP>
- 
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_normal-run_IOnot-comm.gif?direct |}} +{{ :en:hw:04-extensions:xs54_run_ionot_comm.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:007-patron:patron_normal-run_IOnot-comm.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_run_ionot_comm.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
  
-==== Svítí PWR, RUN svítí a krátce pohasíná, TX a RX blikají ==== +==== PWR is On, RUN is On with short blinks, TX and RX are blinking ==== 
-<html><span class="kbBlueText">Stav: </span></html> +<WRAP group> 
-<html><span class="kbBlueLightText">Provoz na RS485</span></html>\\ +<WRAP half column> 
 +<html><span class="kbBlueText">State: </span></html> 
 +<html><span class="kbBlueLightText">RS485 traffic</span></html>\\ 
  
 <html><span class="kbBlueText">RUN LED:</span></html> <html><span class="kbBlueText">RUN LED:</span></html>
Line 126: Line 130:
 /* RS485 traffic */ /* RS485 traffic */
 <html><span class="kbBlueText">TX/RX LED:</span></html> <html><span class="kbBlueText">TX/RX LED:</span></html>
-<html><span class="kbBlueLightText">náhodně blikají</span></html>\\+<html><span class="kbBlueLightText"> randomly blinking</span></html>\\
  
-Nadřazený řídicí systém komunikuje s modulem protokolem Modbus RTU přes RS-485 rozhraní. +The controller communicates with the module using the Modbus RTU protocol via the RS-485 interface. 
  
-/* <WRAP group> 
-<WRAP half column> 
 </WRAP> </WRAP>
- 
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_serial-1_commLoop.gif?direct |}} +{{ :en:hw:04-extensions:xs54_serial-loop.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:007-patron:patron_serial-1_commLoop.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_serial-loop.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
  
-===== Popis speciálních stavů modulu =====+===== Description of special states of the module =====
  
-==== DirectSwitch funkce ==== +==== DirectSwitch function ==== 
-Funkce DirectSwitch je implementována přímo v mikroprocesoru modulu a je proto nezávislá na řídicím SW. Více o této funkci se dočtete v článku věnovaném [[cs:hw:007-patron:description-of-io:01-description-of-di#directswitch|popisu vstupů a výstupů]]. Funkci lze nakonfigurovat do jednoho ze tří režimů, jejich krátký popis naleznete níže:+ 
 +The DirectSwitch function is implemented directly in the microprocessor of the module and is therefore independent of the control SW. You can read more about this function in the article about [[.:description-of-io:01-description-of-di#directswitch|description of inputs and outputs]]. The function can be configured in one of three modes, their short description can be found below: 
  
  
 === DirectSwitch Copy === === DirectSwitch Copy ===
-Stav vstupu je zapsán na výstup. 
  
-/* <WRAP group>+<WRAP group>
 <WRAP half column> <WRAP half column>
 +Input state is copied to the output.
 +
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_DS_copy.gif?direct |}} +{{ :en:hw:04-extensions:xs54_DS_copy.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:007-patron:patron_DS_copy.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_DS_copy.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
 === DirectSwitch Inverse-copy === === DirectSwitch Inverse-copy ===
-Negovaný stav vstupu je zapsán na výstup. 
  
-/* <WRAP group>+<WRAP group>
 <WRAP half column> <WRAP half column>
 +Negated state of the input is set on the output.
 +
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_DS_copy-inverse.gif?direct |}} +{{ :en:hw:04-extensions:xs54_DS_inverse.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:007-patron:patron_DS_copy-inverse.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_ds_inverse.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */  
  
 === DirectSwitch Toggle === === DirectSwitch Toggle ===
-Pokud je na vstupu detekována náběžná hrana, stav výstupu je negován. +<WRAP group>
- +
-/* <WRAP group>+
 <WRAP half column> <WRAP half column>
 +If a rising edge is detected on the input, the output state is negated.
 +
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :en:hw:007-patron:patron_DS_toggle.gif?direct |}} +{{ :en:hw:04-extensions:xs54_DS_toggle.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:007-patron:patron_DS_toggle.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_DS_toggle.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
 ==== Master Watchdog ==== ==== Master Watchdog ====
-Pokud je funkce na mikroprocesoru modulu povolena, procesor nepřetržitě monitoruje komunikaci z řídicího systému. Pokud během nastaveného času není detekována komunikace, mikroprocesor rozšiřujícího modulu se automaticky restartuje a nastaví uloženou výchozí konfiguraci. Více o této funkci se dočtete v článku věnovaném [[cs:hw:007-patron:description-of-io:01-description-of-di#default-set|popisu vstupů a výstupů]]. 
  
-/* <WRAP group>+<WRAP group>
 <WRAP half column> <WRAP half column>
 +If the function is enabled on the microprocessor of the module, the processor continuously monitors the communication from the controller. If no commands are detected during the set time, the section microprocessor automatically restarts and sets the saved default configuration. You can read more about this function in the article about [[.:description-of-io:01-description-of-di#default-set|description of inputs and outputs]]. 
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :cs:hw:007-patron:patron_MWD_reboot_cz.gif?direct |}} +{{ :en:hw:04-extensions:xs54_MWD_reboot_en.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/cs:hw:007-patron:patron_MWD_reboot_cz.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_MWD_reboot_en.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
-==== Aktualizace firmwaru modulu ==== +==== Extension firmware update ==== 
-Při přehrávání FW modulu svítí všechny LED v horní i dolní řadě, kromě každé čtvrté. Do tohoto pravidla se zahrnují i LED, které nejsou osazeny.  +<WRAP group>
- +
-Dokončení aktualizace je indikováno rozsvícením každé druhé LED a následný restart modulu je indikován rozsvícením všech LED, včetně RUN. +
- +
-/* <WRAP group>+
 <WRAP half column> <WRAP half column>
 +When the module FW is uploaded, all LEDs in the top and bottom row are On, except for every fourth. LEDs that are not fitted are also included in this rule.
 +
 +Completion of the FW update is indicated by turning On every second LED and subsequent restart of the module is indicated by turning On all LEDs, including RUN.
 </WRAP> </WRAP>
  
 <WRAP half column> <WRAP half column>
-{{ :cs:hw:007-patron:patron_FW_upgrade_cz.gif?direct |}} +{{ :en:hw:04-extensions:xs54_FW_upgrade_en.gif?direct |}} 
-<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/cs:hw:007-patron:patron_FW_upgrade_cz.gif"></html>+<html><img style="width: 1px" src="/_media/files:img_breakline.png" onload="imgPermLoop(this)" data-address="/_media/en:hw:04-extensions:xs54_fw_upgrade_en.gif"></html> 
 +</WRAP>
 </WRAP> </WRAP>
-</WRAP> */ 
  
  
(Still can't find what you're looking for?)