Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
en:hw:05-sensors:1-wire [2020/06/26 07:04] avsetula [1W-TH-IB on-wall sensor] |
en:hw:05-sensors:1-wire [2021/11/03 06:41] (current) avsetula [Temperature/relative air humidity sensor] |
||
---|---|---|---|
Line 9: | Line 9: | ||
==== Unipi 1-Wire sensors ==== | ==== Unipi 1-Wire sensors ==== | ||
- | {{ :cs:hw:05-sensors:unipi-temp-1w.jpg?direct&140|}} | + | {{page>en:hw:05-sensors:1-wire-unipi-hidden}} |
- | * the most inexpensive variant of 1W temperature sensor | + | {{ :files:img_breakline.png?nolink |}} |
- | * digital waterproff sensor based on the DS18B20 chip /* FIXME | + | |
- | * Rozměry kovového části čidla jsou 6x30mm */ | + | |
- | * suitable for temperature measurements in range of -55°C/+85°C (up to +125°C with reduced accuracy) | + | |
- | * compatible with all Unipi 1-Wire devices -> 4-wire connection | + | |
- | * easy connection to Unipi controllers using an RJ45 connector with a suitable [[https://www.unipi.technology/kabely-redukce-rozbocovace-c41|reduction or splitter]] | + | |
- | * [[https://www.unipi.technology/1-wire-teplotni-senzor-p63|link to e-shop]] | + | |
- | * more info and tips regarding sensor connection are available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]] | + | |
- | <html><span class="kbBlueText">Examples of use:</span></html> | + | ==== TGL-40 rod sensor ==== |
- | * measuring indoor or outdoor temperature for the purpose of heating regulation | + | {{page>en:hw:05-sensors:1-wire-tgl40-hidden}} |
- | * measuring temperature of liquids stored in tanks (several sensors can be placed on various levels to improve the accuracy) | + | {{ :files:img_breakline.png?nolink |}} |
- | * measuring temperature of liquids in pipes | + | |
- | <html><span class="kbBlueText">Possible applications:</span></html> | + | ==== DS 150B contact sensor ==== |
- | * all Unipi PLCs with 1-Wire bus, including Unipi 1.1/1.1 Lite | + | {{page>en:hw:05-sensors:1-wire-ds150b-hidden}} |
- | * the Unipi Extension xG18 module | + | {{ :files:img_breakline.png?nolink |}} |
- | * the Unipi 8-port hub or the 2-port splitter | + | |
- | If you want to connect the temperature sensor directly to Neuron or Axon controllers, you can do so by cutting off the connector and connecting the sensor directly to the PLC's 1-Wire terminal. Older variants of Unipi Neuron and Axon controllers, as well as Unipi 1.1/1.1 Lite, support a direct connection as they feature an RJ45 port. Further info is available in the [[https://kb.unipi.technology/en:automation:02-glossary:1wire-hidden#wire_on_unipi_neuron_rj45|1-Wire bus and 1-Wire sensor connection article]]. | + | ==== SD 125C sump sensor ==== |
+ | {{page>en:hw:05-sensors:1-wire-sd125c-hidden}} | ||
+ | {{ :files:img_breakline.png?nolink |}} | ||
+ | ==== SD 115C sensor for outdoors and halls ==== | ||
+ | {{page>en:hw:05-sensors:1-wire-sd115c-hidden}} | ||
{{ :files:img_breakline.png?nolink |}} | {{ :files:img_breakline.png?nolink |}} | ||
==== 1W-T-IB on-wall sensor ==== | ==== 1W-T-IB on-wall sensor ==== | ||
- | {{ :cs:hw:05-sensors:unipi-wall-old-1w.jpg?direct&180|}} | + | {{page>en:hw:05-sensors:1-wire-1wtib-hidden}} |
- | * variant of the 1W on-wall temperature sensor | + | |
- | * an interior 1W sensor based on the DS18B20 chip | + | |
- | * suitable for measurements in range of -55°C/+85°C | + | |
- | * compatible with all Unipi 1W devices -> 4-wire connection | + | |
- | * easy connection to Unipi PLCs | + | |
- | * possible connection through RJ45 connector via a suitable [[https://www.unipi.technology/kabely-redukce-rozbocovace-c41|splitter/hub]] | + | |
- | * [[https://www.unipi.technology/nastenny-teplotni-senzor-1w-t-ib-p249|link to e-shop]] | + | |
- | * additional info and tips for the sensor and its connection available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]] | + | |
- | + | ||
- | <html><span class="kbBlueText">Examples of use:</span></html> | + | |
- | * measuring indoor temperature for the purpose of control and regulation of heating, air conditioning, ventilation or heat recovery | + | |
- | + | ||
- | <html><span class="kbBlueText">Possible applications:</span></html> | + | |
- | * all Unipi PLCs with 1W bus including Unipi 1.1/Lite | + | |
- | * Unipi Extension xG18 (with RJ45 connection) | + | |
- | * Unipi 1-Wire hubs or splitters (with RJ45 connection) | + | |
- | + | ||
- | The on-wall sensor can be connected directly to the 1W terminal on Axon or Neuron controllers. Alternatively, you can use a suitable hub or splitter (requires adding RJ45 connector to the sensor's cable); this option allows for connecting multiple sensors to a single PLC. RJ45 connector can be also used to connect the sensor to older Unipi Neuron or Axon controllers, or to Unipi 1.1/1.1 Lite. Further info is available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]]. | + | |
{{ :files:img_breakline.png?nolink |}} | {{ :files:img_breakline.png?nolink |}} | ||
==== 1W-T-IB2 on-wall sensor ==== | ==== 1W-T-IB2 on-wall sensor ==== | ||
- | {{ :cs:hw:05-sensors:unipi-wall-new-1w.jpg?direct&180|}} | + | {{page>en:hw:05-sensors:1-wire-1wtib2-hidden}} |
- | * redesign of the 1W on-wall temperature sensor | + | |
- | * an interior 1W sensor based on the DS18B20 chip | + | |
- | * suitable for measurements in range of -55°C/+85°C | + | |
- | * compatible with all Unipi 1W devices -> 4-wire connection | + | |
- | * easy connection to Unipi PLCs | + | |
- | * possible connection through RJ45 connector via a suitable [[https://www.unipi.technology/kabely-redukce-rozbocovace-c41|splitter/hub]] | + | |
- | * [[https://www.unipi.technology/cs/nastenny-teplotni-senzor-1w-t-ib2-p350|link to e-shop]] | + | |
- | * additional info and tips for the sensor and its connection available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]] | + | |
- | + | ||
- | <html><span class="kbBlueText">Examples of use:</span></html> | + | |
- | * measuring indoor temperature for the purpose of control and regulation of heating, air conditioning, ventilation or heat recovery | + | |
- | + | ||
- | <html><span class="kbBlueText">Possible applications:</span></html> | + | |
- | * all Unipi PLCs with 1W bus including Unipi 1.1/Lite | + | |
- | * Unipi Extension xG18 (with RJ45 connection) | + | |
- | * Unipi 1-Wire hubs or splitters (with RJ45 connection) | + | |
- | + | ||
- | The on-wall sensor can be connected directly to the 1W terminal on Axon or Neuron controllers. Alternatively, you can use a suitable hub or splitter (requires adding RJ45 connector to the sensor's cable); this option allows for connecting multiple sensors to a single PLC. RJ45 connector can be also used to connect the sensor to older Unipi Neuron or Axon controllers, or to Unipi 1.1/1.1 Lite. Further info is available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]]. | + | |
{{ :files:img_breakline.png?nolink |}} | {{ :files:img_breakline.png?nolink |}} | ||
===== Temperature/relative air humidity sensor ===== | ===== Temperature/relative air humidity sensor ===== | ||
+ | <WRAP center round important 95%> | ||
The following sensors featuring rel. air humidity sensor **are not compatible with [[https://www.unipi.technology/unipi-extension-xg18-p331|Unipi Extension xG18]] module**. | The following sensors featuring rel. air humidity sensor **are not compatible with [[https://www.unipi.technology/unipi-extension-xg18-p331|Unipi Extension xG18]] module**. | ||
+ | </WRAP> | ||
+ | |||
==== 1W-TH-IB on-wall sensor ==== | ==== 1W-TH-IB on-wall sensor ==== | ||
- | {{ :cs:hw:05-sensors:unipi-wall-old-1w.jpg?direct&180|}} | + | {{page>en:hw:05-sensors:1-wire-1wthib-hidden}} |
- | * indoor 1W temperature/humidity sensor | + | {{ :files:img_breakline.png?nolink|}} |
- | * designed for on-wall installation | + | |
- | * easy connection to Unipi controllers | + | |
- | * compatible with all Unipi 1W devices -> 4-wire connection | + | |
- | * possible connection through RJ45 connector via a suitable [[https://www.unipi.technology/kabely-redukce-rozbocovace-c41|splitter/hub]] | + | |
- | * [[https://www.unipi.technology/nastenny-teplotni-senzor-1w-th-ib-p251|link to e-shop]] | + | |
- | * additional info and tips for the sensor and its connection available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]] | + | |
- | + | ||
- | <html><span class="kbBlueText">Examples of use:</span></html> | + | |
- | * measuring indoor temperature and rel. air humidity for the purpose of control and regulation of heating, air conditioning, ventilation or heat recovery | + | |
- | + | ||
- | <html><span class="kbBlueText">Possible applications:</span></html> | + | |
- | * all Unipi PLCs with 1W bus including Unipi 1.1/Lite | + | |
- | * Unipi 1-Wire hubs or splitters (with RJ45 connection) | + | |
- | + | ||
- | The on-wall sensor can be connected directly to the 1W terminal on Axon or Neuron controllers. Alternatively, you can use a suitable hub or splitter (requires adding RJ45 connector to the sensor's cable); this option allows for connecting multiple sensors to a single PLC. RJ45 connector can be also used to connect the sensor to older Unipi Neuron or Axon controllers, or to Unipi 1.1/1.1 Lite. Further info is available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]]. {{ :files:img_breakline.png?nolink|}} | + | |
==== 1W-TH-IB2 ==== | ==== 1W-TH-IB2 ==== | ||
- | {{ :cs:hw:05-sensors:unipi-wall-new-1w.jpg?direct&180|}} | + | {{page>en:hw:05-sensors:1-wire-1wthib2-hidden}} |
- | * redesign of the temperature/humidity indoor sensor | + | {{ :files:img_breakline.png?nolink|}} |
- | * designed for on-wall installation /* FIXME | + | |
- | * Rozměry plastové krabičky jsou 100 × 100 × 25 mm */ | + | |
- | * compatible with all Unipi 1W devices -> 4-wire connection | + | |
- | * easy connection to Unipi PLCs | + | |
- | * possible connection through RJ45 connector via a suitable [[https://www.unipi.technology/kabely-redukce-rozbocovace-c41|splitter/hub]] | + | |
- | * [[https://www.unipi.technology/nastenny-teplotni-senzor-1w-th-ib2-p351|link to e-shop]] | + | |
- | * additional info and tips for the sensor and its connection available in [[en:automation:02-glossary:1wire-hidden|the 1-Wire article]] | + | |
- | + | ||
- | <html><span class="kbBlueText">Examples of use:</span></html> | + | |
- | * measuring indoor temperature and rel. air humidity for the purpose of control and regulation of heating, air conditioning, ventilation or heat recovery | + | |
- | + | ||
- | <html><span class="kbBlueText">Possible applications:</span></html> | + | |
- | * all Unipi PLCs with 1W bus including Unipi 1.1/Lite | + | |
- | * Unipi 1-Wire hubs or splitters (with RJ45 connection) | + | |
- | + | ||
- | The on-wall sensor can be connected directly to the 1W terminal on Axon or Neuron controllers. Alternatively, you can use a suitable hub or splitter (requires adding RJ45 connector to the sensor's cable); this option allows for connecting multiple sensors to a single PLC. RJ45 connector can be also used to connect the sensor to older Unipi Neuron or Axon controllers, or to Unipi 1.1/1.1 Lite. Further info is available in [[en:automation:02-glossary:1wire-hidden#w-t_h-ib_1w-t_h-ib2|the 1-Wire article]]. {{ :files:img_breakline.png?nolink|}} | + | |
- | + | ||
- | {{ :files:img_breakline.png?nolink |}} | + |