Differences

This shows you the differences between two versions of the page.

--- en:hw:neuron-unipi11-flash-hidden [2023/08/11 07:25]
zrusek [Flashing OS from a Windows PC]
+++ en:hw:neuron-unipi11-flash-hidden [2023/08/11 11:42]
avsetula [Flashing OS from a Windows PC]
@@ Line 19: / Line 19: @@
 <WRAP center round important 90%>
-**Caution!** \\ Extreme caution is essential when choosing a disc. Selecting the wrong storage medium could result in data loss on a medium other than the desired one (SD card /*/USB flash drive*/).
+**Caution!** \\ Extreme caution is essential when choosing a disc. Selecting the wrong storage medium could result in data loss on a storage other than the desired one /*(SD card /USB flash drive)*/.
 </WRAP>
 <WRAP center round info 90%>
-**Note:** \\ For trouble-free **Mervis OS** usage on Unipi Neuron units, you will need a microSD card with a capacity of **at least 2 GB**. \\
+**Note:** \\ For trouble-free **Mervis OS** usage on Unipi Neuron and Unipi 1.1 devices, you will need  storage with capacity of **at least 2 GB**. \\
-If you choose a different platform, we recommend using a microSD card with **at least 4 GB** capacity \\ \\
+If you choose a different platform, we recommend using a storage with **at least 4 GB** capacity \\ \\
-We always recommend using industrial SD cards.
+We always recommend using industrial [[https://www.unipi.technology/2gb-industrial-microsd-card-slc-p232?categoryId=33|SLC]] or [[https://www.unipi.technology/4gb-swissbit-s-46u-pslc-memory-card-with-an-extended-lifespan-p393?categoryId=33|pSLC]] SD cards.
 </WRAP>
@@ Line 49: / Line 49: @@
 {{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_04_from_url.png?direct |}}
-The field labeled **Enter a valid URL** (under the heading **Use Image URL**) is used to enter the address of the OS image. If the image source requires a login credentials, a username and password can be entered in the **Authentication** section.
+The field labeled **Enter a valid URL** (under the heading **Use Image URL**) is used to enter the address of the OS image.
+OS image URL can be obtained by right click on "Download" button in [[en:files:software:os-images:00-start|OS Image section]] and selecting **Copy Link** from context menu.
+{{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_16_copy_url.png?direct |}}
+ If the image source requires a login credentials, a username and password can be entered in the **Authentication** section.
 {{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_05_url_setup.png?direct |}}
@@ Line 60: / Line 66: @@
 {{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_07_url_flash.png?direct |}}
+===== Cloning a disk with an OS image =====
+The last option in BalenaEtcher is to clone the storage. Cloning is especially useful for creating a backup before the final placement of the Unipi device and start of operation. In the main menu, this is the third option **Clone drive**.
+{{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_08_cloning_start.png?direct |}}
+The selection of source storage will appear. When selecting, please note the caution [[#nahrani_os_z_windows_pc| in the introduction of the article]].
+{{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_09_cloning_source.png?direct |}}
+To select a target storage (or multiple storages), click **Select target**. When selecting, please note the caution [[#nahrani_os_z_windows_pc| in the introduction of the article]].
+{{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_10_cloning_target.png?direct |}}
+Flashing the OS image to storage will start after clicking on **Flash!**
+{{ :en:sw:03-3rd-party:balena-etcher:balena_documentation_11_cloning_flash.png?direct |}}