Differences

This shows you the differences between two versions of the page.

--- en:sw:01-mervis:download-history-log-hidden [2020/05/21 06:54] – avsetula
+++ en:sw:01-mervis:download-history-log-hidden [2021/05/03 09:47] (current) – avsetula
@@ Line 1: / Line 1: @@
 ====== Download history log from PLC ======
+<WRAP group>
+<WRAP half column 81%>
 The following guide describes the process of downloading a local PLC history, eg. without the need to connect the PLC to the Mervis DB service. After the download, a CSV file is generated for potential further use.
+</WRAP>
-This tutorial serves as an addendum to the [[storing-data-to-history-log-hidden|Storing data in a History log]].
+<WRAP half column 15%>
+;;#
+<html><span class="dev-tag dev-patron">Patron</span></html> \\
+<html><span class="dev-tag dev-neuron">Neuron</span></html> \\
+<html><span class="dev-tag dev-gate">Gate</span></html> \\
+<html><span class="dev-tag dev-unipi11">Unipi&nbsp1.1</span></html> \\
+<html><span class="dev-tag dev-axon">Axon</span></html>
+;;#
+</WRAP>
+</WRAP>
 <WRAP center round box>
@@ Line 10: / Line 21: @@
   - switched the Mervis IDE to [[en:sw:01-mervis:creating-new-project-hidden#switching_from_simple_mode_to_full_mode|Full mode]]
   - created a history log and imported variables into it
-  - <html><span class="wrongTranslate">připravený projekt můžete vidět na obrázku pod odstavcem</span></html>
+  - a complete project can be seen on the picture below the article
+**Note:** This tutorial serves as an addendum to the [[storing-data-to-history-log-hidden|Storing data in a History log]]. For this reason we recommend to start by creating a project according to the mentioned guide and to use it to apply the guide below.
 </WRAP>
@@ Line 18: / Line 31: @@
 {{:en:sw:01-mervis:02_download-history-log_en.png?direct|}}
-Yet another dialogue window will be displayed. Enter the ''file name'' and set the ''location'' the file will be downloaded into. The default download location is in the folder of the opened Mervis IDE project. <html><span class="wrongTranslate">Follow up by setting the save period and choosing whether time should be saved in UTC or according to the PLC’s local time.</span></html> Finish by **selecting the PLC** you wish to download the history log from.
+Yet another dialogue window will be displayed. Enter the ''file name'' and set the ''location'' the file will be downloaded into. The default download location is in the folder of the opened Mervis IDE project. The next step is to set the **from/to** time interval and to choose whether time should be saved in UTC or according to the PLC’s local time. Finish by **selecting the PLC** you wish to download the history log from.
 {{:en:sw:01-mervis:03_download-history-log_en.png?direct|}}