Differences

This shows you the differences between two versions of the page.

--- en:sw:01-mervis:scada-24-demo-hidden [2020/07/17 14:27]
avsetula created
+++ en:sw:01-mervis:scada-24-demo-hidden [2021/08/05 15:01] (current)
avsetula
@@ Line 1: / Line 1: @@
-====== Free measuring of up to 24 temperatures ======
+====== Multiple temperature monitoring using xG18 extension ======
+<WRAP group>
+<WRAP half column 81%>
 The following guide demonstrates a quick deployment and testing of a PLC Unipi with three Unipi Extension xG18 extension models, an external web server (HMI), Mervis DB, Mervis Proxy and Mervis SCADA. As this guide assumes this is your first experience with Unipi controllers, every step is thoroughly explained.
+</WRAP>
+<WRAP half column 15%>
+;;#
+<html><span class="dev-tag dev-patron">Patron</span></html> \\
+<html><span class="dev-tag dev-neuron">Neuron</span></html> \\
+<html><span class="dev-tag dev-gate">Gate</span></html> \\
+<html><span class="dev-tag dev-axon">Axon</span></html>
+;;#
+</WRAP>
+</WRAP>
 <WRAP center round info>
@@ Line 13: / Line 25: @@
   * 3x [[https://www.unipi.technology/unipi-extension-xg18-p331|Unipi Extension xG18]]
   * 24x [[https://www.unipi.technology/cs/1-wire-temperature-sensor-p63|1-Wire Temperature Sensor]]
-  * [[https://www.unipi.technology/power-supplies-c15|24 VDC power supply]]
+  * [[https://www.unipi.technology/power-supplies-c15|24 V⎓ power supply]]
   * Internet connection
   * Any PC with OS Windows and [[en:files:software:mervis:00-start|Mervis IDE]] 2.3.0
@@ Line 19: / Line 31: @@
 {{ :files:img_breakline_2.png?nolink |}}
-The selected Neuron S103 controller serves just as an example of the least expensive variant. The following guide can be used with any Unipi Neuron/Axon controller.
+The selected Neuron S103 controller serves just as an example. The following guide can be used with any Unipi controller, except Unipi 1.1.
 {{ :files:img_breakline_2.png?nolink |}}
@@ Line 25: / Line 37: @@
 <html><span class="kbBlue-H4alt">Preparations for this tutorial:</span></html>
   - Download and upload Mervis OS into your PLC and install Mervis IDE
+    - [[en:sw:01-mervis:running-on-patron-hidden|Link for Unipi Patron]]
     - [[en:sw:01-mervis:running-on-neuron-hidden|Link for Unipi Neuron]]
+    - [[en:sw:01-mervis:running-on-gate-hidden|Link for Unipi Gate]]
     - [[en:sw:01-mervis:running-on-axon-hidden|Link for Unipi Axon]]
   - [[en:sw:01-mervis:connecting-to-extension-xg18-hidden#connecting_xg18_to_an_unipi_plc|Connect the xG18 modules to your Unipi PLC using the RS485 interface]]. Make sure to follow the serial connection scheme (see the picture in the link) and continue to the next xG18 in line. With all xG18’s connected terminate the bus on each end (a switch next to the RS485’s connector). In this case (eg. the bus begins with an Unipi PLCs and ends with xG18 module), use terminating resistors on both of these devices.
@@ Line 34: / Line 48: @@
   - Download this project, extract it and open it in Mervis IDE
 ;#;
-{{ :files:software:mervis:example-projects:scada_24_demo_project_en_v2.3.0.10_100623.zip |}}
+{{ :files:software:mervis:example-projects:scada_24_demo_project_en_v2.3.0_100623.zip |}}
 ;#;
 </WRAP>