Differences

This shows you the differences between two versions of the page.

--- en:sw:01-mervis:sd-emmc-diagnostics-hidden [2024/04/24 07:20] – [Example of use] kcerny
+++ en:sw:01-mervis:sd-emmc-diagnostics-hidden [2025/07/09 12:42] (current) – updated wraps and added warning about history in to ram ofojt
@@ Line 1: / Line 1: @@
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
 ====== SD / eMMC Diagnostics ======
@@ Line 17: / Line 15: @@
 <WRAP half column 100%>
-Unipi controllers have Modbus registers for health monitoring of system storage - MicroSD card and eMMC memory. This article describes how and why you can check those values in Mervis and what do they mean.
+Unipi controllers have Modbus registers for health monitoring of system storage - MicroSD card or eMMC memory. This article describes how and why you can check those values in Mervis and what do they mean.
 ----
@@ Line 25: / Line 23: @@
 </WRAP>
-<WRAP center round important 90%>
+{{page>.:store-history-in-ram-hidden}}
-If your storage lifespan changes, you can contact Unipi support, describe the situation and attach Mervis solution. Our support wil recommend you best suited settings, so your storage will not wear out.
+<WRAP group center round box 95%>
+{{ :files:img_warning-line_b.png?nolink |}}
+<WRAP half column 13%>
+{{ :en:hw:09_safety-instructions_pseudo-ISO-7010-attention.png?nolink |(!)}}
+</WRAP>
+<WRAP half column 83%>
+**Attention:** \\
+If your storage lifespan changes, you can contact Unipi support, describe the situation and attach Mervis solution. Our support will recommend you the best settings to keep your storage from wearing out.
+</WRAP>
 </WRAP>
@@ Line 45: / Line 52: @@
 {{ :en:sw:01-mervis:sd-emmc-diagnostics-hidden:variables.png?direct |}}
-<WRAP center round info 90%>
+<WRAP group center round box 95%>
+{{ :files:img_warning-line_b.png?nolink |}}
+<WRAP half column 13%>
+{{ :en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(!)}}
+</WRAP>
+<WRAP half column 83%>
+**Note:** \\
 Device Modbus definition has to be at least **v2_2**, and also **OS version has to be at least 2.4.0**.
+</WRAP>
 </WRAP>
-For Neuron units, there is also available information about on/off cycles with current SD card and also SD card vendor, but only for selected cards.
+For Neuron units, there is also available information about on/off cycles with current SD card and also SD card vendor, but only for specific cards.
 ===== Example of use =====
@@ Line 59: / Line 73: @@
 {{ :en:sw:01-mervis:sd-emmc-diagnostics-hidden:example-program-r.png?direct |}}
-<WRAP center round info 90%>
+<WRAP group center round box 95%>
+{{ :files:img_warning-line_b.png?nolink |}}
+<WRAP half column 13%>
+{{ :en:hw:08_safety-instructions_pseudo-ISO-7010-info.png?nolink |(!)}}
+</WRAP>
+<WRAP half column 83%>
+**Note:** \\
 Description of **changeChecker** function block can be found in article [[en:sw:01-mervis:variable-backup-hidden?tns#zaloha_pri_zmene_hodnoty|Variable Backup, part "Event variable backup"]].
+</WRAP>
 </WRAP>
 More information about e-mail sending from Mervis system can be found in [[en:sw:01-mervis:sending-email-hidden|a separate article]].