Differences

This shows you the differences between two versions of the page.

--- en:sw:01-mervis:sending-sms-hidden [2021/07/09 10:11]
avsetula
+++ en:sw:01-mervis:sending-sms-hidden [2021/09/02 07:52] (current)
avsetula
@@ Line 1: / Line 1: @@
 <html><div class="version-switch">
-  <a href="/en:sw:01-mervis:sending-sms-lte-hidden"><div>LTE</div></a>
+  <a href="/en:sw:01-mervis:sending-sms-lte-hidden"><div>Patron / Axon LTE</div></a>
-  <a href="#sending_sms"><div class="actual-version">GSM</div></a>
+  <a href="#sending_sms"><div class="actual-version">Neuron GSM</div></a>
 </div></html>
-====== Sending SMS ======
+====== Receiving/sending SMS ======
 <WRAP group>
-<WRAP half column 81%>
+<WRAP half column 80%>
-[[https://www.unipi.technology/unipi-axon-m565-lte-p305|Some of our PLCs]] are equipped with LTE modem capable of sending SMS. In this tutorial we will learn how to configure such PLC and how to use function block for sending SMS.
+[[https://www.unipi.technology/cs/unipi-neuron-s103-g-p107|Some of our PLCs]] are equipped with a GSM module that is capable of sending and receiving SMS. In this tutorial, we will learn how to configure such PLC and how to use function blocks for sending SMS.
 </WRAP>
-<WRAP half column 15%>
+<WRAP half column 16%>
 ;;#
 <html><span class="dev-tag dev-neuron">Neuron&nbspS103-G</span></html>
@@ Line 15: / Line 16: @@
 </WRAP>
-For sending SMS over LTE modem, you don't need to configure the modem as described in [[lte-configuration-hidden|]]. Instead, you need to configure **Alarm channel**. Double click on the **PLC** in the **Left panel**. Select a **Messaging** subpanel, right click on the blank list of channels and select **Add alarm channel** from the context menu:
+===== Modem configuration =====
+First, you need to set up communication with the modem, for this the **Alarm channel** is used. Double-click on the **PLC** in the **Left panel**. Select the **Messaging** subpanel, right-click on the blank channel list and select **Add alarm channel** from the context menu:
 {{ :en:sw:01-mervis:sms-gsm1.png?direct |}}
-A new alarm channel will appear. By default it is filled with preconfiguration for sending emails. Click on the **Type** (now prefilled with "Smtp") and change it to **Gsm**:
+----
+A new alarm channel will appear. By default, it is set to send e-mail messages. Click on the **Type** (now prefilled with "Smtp") and change it to **Gsm**:
 {{ :en:sw:01-mervis:sms-gsm2.png?direct |}}
-Move over to the channel's properties and change the **Port Number** to **LTE**:
+----
-{{ :en:sw:01-mervis:sms-gsm4.png?direct |}}
+Move over to the channel's properties and change the **Port Number** to **COM1 (TTL)**:
-If the SIM card is protected with a PIN code, enter it, otherwise leave empty:
+{{ :en:sw:01-mervis:sms-gsm3.png?direct |}}
-{{ :en:sw:01-mervis:sms-gsm5.png?direct |}}
+----
-Most modems (UniPi's as well) need initialization commands. Click to three-dot icon next to **AT Commands Definition**. A window will pop up:
+If the SIM card is protected with a PIN code, enter it in the appropriate, otherwise leave it empty:
-{{ :en:sw:01-mervis:sms-gsm6.png?direct |}}
+{{ :en:sw:01-mervis:sms-gsm4.png?direct |}}
-In the drop down menu select the correct modem. For UniPi Axon product line it is **UniPi Axon LTE**:
+----
-{{ :en:sw:01-mervis:sms-gsm7.png?direct |}}
+Most modems (UniPi's as well) need initialization commands. Click to three-dot icon {{:files:dialog-open_button_2.png?nolink|}} next to **AT Commands Definition**. A window will pop up:
-Don't forget to apply this selection by clicking on **Apply** and closing this dialog:
+{{ :en:sw:01-mervis:sms-gsm5.png?direct |}}
-{{ :en:sw:01-mervis:sms-gsm8.png?direct |}}
+----
-The channel is configured and now the changes need to be commited. Click on the **OK** in the red bar:
+Then select the correct modem from the drop-down menu. For Unipi Neuron controllers, this is the **Unipi Neuron GSM - G510**:
-{{:en:sw:01-mervis:sending-sms-08-commit.png?direct|}}
+{{ :en:sw:01-mervis:sms-gsm6.png?direct |}}
-To use the modem in program, look for "**SendSMS Triggered**" function block and place it into a program:
+----
-{{:en:sw:01-mervis:sending-sms-09-place-sendsmstrig.png?direct|}}
+Don't forget to apply this selection by clicking on **Apply** and closing this dialog:
-The function block expects 4 inputs and we will create a auxiliary variables for better debugging. Starting with the variable for input **channel**. Create a **string** variable and set its initial value to the name of the created alarm channel. By default it will be **alrchannel**:
+{{ :en:sw:01-mervis:sms-gsm7.png?direct |}}
-{{:en:sw:01-mervis:sending-sms-10-channel-variable.png?direct|}}
+----
-**
-The same we will do for the rest of the variables:**
-  * **recipient:** string variable containing a phone number in international format such as 00420777666555)
+The channel is configured and now the changes need to be committed. Click on the **OK** in the red bar:
-  * **message:** string variable containing the actual SMS message
-  * **trigger:** bool variable which will execute the sending of the message on **rising edge**
-The result should look similar:
+{{ :en:sw:01-mervis:sms-gsm8.png?direct |}}
-{{:en:sw:01-mervis:sending-sms-11-all-variables.png?direct|}}
-Now deploy the solution and start the debugging mode. On each change of the variable **trigger** from **False** to **True**, the message will be send:
+====== ======
+/* Odeslání SMS */
+{{page>en:sw:01-mervis:send-sms-hidden}}
-{{:en:sw:01-mervis:sending-sms-12-debugging.png?direct|}}
-If the SMS has been send correctly, the **Result** output will be **0**. Otherwise an error code will be issued and you can consult help (F1) for the given function block to determine the cause of the error.
+====== ======
+/* Příjem SMS */
+{{page>en:sw:01-mervis:receive-sms-hidden}}