This is an old revision of the document!

Storing data into Mervis DB

In this tutorial, we are going to demonstrate how to use history logs for long-term storing of data from Unipi controllers running Mervis OS.


The first step is to set up the storage.

If you wish to use the Mervis DB service to back up variables using our servers, you need to set its communication parameters first. In the left panel, select PLC.

Approximately in the middle of the PLC's properties a section Mervis DB Parameters is located. Set its values to the following:

  • Enable: set to true to enable the logging
  • URL: the URL of the Mervis DB service. For controllers running Mervis OS v2.3.0 or newer, use For the rest, use
  • Communication period [min]: this is the period in which the PLC will send the gathered data
  • Certificate validation: set to FALSE by default, more info in the Certificate validation
  • Username: the Mervis DB username you obtained from your account on
  • Password: the Mervis DB password you obtained from your account on

Observant users probably realized we just entered a second different time parameter, namely the Communication period.

What's the difference?

The Save Period defines how often the PLC will sample variable values. The Communication Period is how often the PLC will send those samples to the Mervis DB.

  • Communication Period defines how often will PLC send data to Mervis DB. Can be set in PLC Properties
  • Save Period determines how often will PLC parse variable values. Can be configured in the History log.

Since we changed the configuration of the PLC, we need to upload it. Right click on the PLC in the Left panel and select the PLC Operation → PLC Setup → Upload configuration. If you are not sure, check out the Uploading a RunTime configuration tutorial.

You will be asked how to connect to the PLC. If you are on the same network, you can select UDP Broadcast. If not (ie. you use a proxy connection), select Use deploy parameters and confirm by clicking on OK.

Deploy the solution, start the Debugging Mode and open the System status tab located on the main panel. In the MervisDB section (or RcWareDB in older versions of the IDE), you can check if the PLC communicates with Mervis DB. If the Communication interval [min] is set to 1 minute, the Saved logs value will increase every 60 seconds.

Let's move into the Mervis DB Viewer - a web tool for analyzing data stored by controllers. Open a web browser and enter address. A login screen will appear - enter the login info used in the PLC settings. Upon entering them, click on Set and then on Close.

Mervis DB web interface will open. In its left panel your PLC should be visible, identified by the name you entered into History runtime identification. Click on it to display a list of variables selected in the History log. Select them all to start parsing their values.

You can visually check our simple temperature regulator project works. Using the cursor you can display parsed data values, set various different graph types and many more options.