Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:sw:01-mervis:variable-backup-hidden [2023/12/20 13:15] avsetula [Disabled variable backup] |
en:sw:01-mervis:variable-backup-hidden [2023/12/20 13:47] (current) avsetula |
||
|---|---|---|---|
| Line 155: | Line 155: | ||
| The local variable button is connected to the CLK input of the R-TRIG block.The R_TRIG block at the rising edge at the CLK input sets the output Q to the state TRUE for the length of one program cycle.The BD13 block and the F_TRIG block are used to delay the signal by the set time (pushTime). After the set time has elapsed, the "button" variable is set to FALSE using the "SEL" block. | The local variable button is connected to the CLK input of the R-TRIG block.The R_TRIG block at the rising edge at the CLK input sets the output Q to the state TRUE for the length of one program cycle.The BD13 block and the F_TRIG block are used to delay the signal by the set time (pushTime). After the set time has elapsed, the "button" variable is set to FALSE using the "SEL" block. | ||
| - | ** This block requires control from the HMI, the variable button is controlled directly ** | + | **This block is controlled by its internal variable 'button', and its value can be changed only from the HMI!** |
| </WRAP> | </WRAP> | ||
