Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:sw:02-sdks:03-ssh [2018/12/07 19:22]
tomas_knot
en:sw:02-sdks:03-ssh [2019/01/28 17:21] (current)
jan_kozak [UniPi Axon]
Line 4: Line 4:
 All UniPi devices include a full-featured ARM-based Linux environment,​ which is accessible via a Secure Shell console after following the steps below. This allows the users of UniPi devices to fully leverage the incredible versatility provide by open source software packages. All UniPi devices include a full-featured ARM-based Linux environment,​ which is accessible via a Secure Shell console after following the steps below. This allows the users of UniPi devices to fully leverage the incredible versatility provide by open source software packages.
  
-The process of enabling accesss to it differs slightly between the three generations of UniPi devices, and is detailed below for UniPi Axon. The process for UniPi 1.1 and UniPi Neuron is the same as for ordinary Raspberry Pi.+The process of enabling accesss to it differs slightly between the three generations of UniPi devices, and is detailed below for UniPi Axon. The process for UniPi 1.1 and UniPi Neuron is the same as for ordinary Raspberry ​ 
 +Pi.
  
 ==== UniPi Axon ==== ==== UniPi Axon ====
Line 21: Line 22:
       - Wi-Fi: The UniPi Axon service mode will create a Wi-Fi access point with SSID “UNIPICONFIG” and password “unipi.technology”. The interface will be accessible on IP addresses 192.168.200.200 and 192.168.201.1       - Wi-Fi: The UniPi Axon service mode will create a Wi-Fi access point with SSID “UNIPICONFIG” and password “unipi.technology”. The interface will be accessible on IP addresses 192.168.200.200 and 192.168.201.1
  
-After accessing the web interface you should see a screen with multiple buttons. To enable the SSH server first press the button with “Enable ssh” in the centre of the screen and then the “Restart System” button in the upper right corner of the screen.+After accessing the web interface you should see a screen with multiple buttons. To enable the SSH server first press the button with “Enable ssh” in the centre of the screen and then the “Restart System” button in the upper right corner of the scr 
 +een.
  
 ==== Setting up tools ==== ==== Setting up tools ====