Differences

This shows you the differences between two versions of the page.

--- en:sw:03-3rd-party:nodered:installation-neuron [2019/09/13 13:32]
tomhora old revision restored (2019/01/29 15:58)
+++ en:sw:03-3rd-party:nodered:installation-neuron [2020/03/06 08:29]
tomhora
@@ Line 1: / Line 1: @@
-====== Node-RED on UniPi Neuron ======
+====== Node-RED on Unipi Neuron ======
 The following manual will guide you through the process of powering up your UniPi Neuron controller. Before the start, please check the device for any damage that occurred during shipment or any other visible defect.
 ===== OS installation =====
@@ Line 5: / Line 5: @@
 Prepare an SD card to which the OS will be burned. You can purchase the card in a single package with the controller – if the card was not purchased this way, you need to either purchase one or use your own card. The complete software package requires approximately **2.5 GB**; while a 4GB memory card would be sufficient theoretically, we strongly recommend using an **8 GB** or **16 GB**. The card’s speed is important, we thus recommend to choose a faster card of Class 10 or more.
-After obtaining the card, download the UniPian OS image. In the [[files:software:os-images:00-start|Files & Downloads]] section, you can find the latest release. Download and extract the RAR archive containing a //.img// file to be burned onto an SD card.
+After obtaining the card, download the [[https://kb.unipi.technology/en:files:software:os-images:00-start#neuron_opensource_os | Unipi Neuron OpenSource OS image]]. Download and extract the archive containing a //.img// file to be burned onto an SD card.
-{{:en:sw:03-3rd-party:nodered:screenshot_113.png?300|}}
 We also recommend formatting the SD card first by using the [[https://kb.unipi.technology/files:software:tools:00-start#sd_card_formatter|SD Card Formatter]]