Designed for contact measurements of pipeline surface temperature (IP65 protection)
Digital water-proof 1W sensor featuring the DS18B20 chip
Probe size: (h x w x d): 40 x 12 x 12 mm
Holding metal band length: 40 cm
Minimal pipe diameter: 20 mm
Temperature sensors are suitable for measuring temperature in the range of -10 °C to 85 °C. With reduced accuracy, the sensors can be used in a range of -30°C to 100°C.
Cable temperature range: -30 °C to 105 °C
Suitable for all Unipi devices with a 1W bus → 4-wire connection
Easy connection to the Extension xG18 via RJ45 connector
-
For more information and tips regarding the sensor connection, please visit the
1-Wire article
-
Examples of use:
Applicable for:
A direct connection to Unipi unit can be performed by cutting away the connector and connecting the sensor to the 1W terminal of Patron or Neuron units. Older Neuron units and the Unipi 1.1/Lite feature an RJ45 connector, allowing for a direct connection. For more info, please visit the 1-Wire bus and sensor connection.