Outdoor variant with IP65 protection
Digital 1W senzor featuring the DS18B20 chip
Metal probe dimensions: ⌀6* x 25 mm (±0,1 mm*)
Plastic cover dimensions (h x w x d): 70 x 63 x 34 mm
Temperature sensors are suitable for temperature measuring in the range of -10°C to 85°C. With reduced accuracy, the sensors can be used in a range of -30°C to 100°C
Head ambient working temperature: -30°C to 100°C
Connection: shrouded terminal
Suitable for the 4-wire connection used on all Unipi sensors and hubs
Can be wired to the RJ45 connector and connected to the Extension xG18 or Unipi unit via a suitable
splitter
For more info and tips regarding the sensor connection, please visit the article about
the 1-Wire bus
-
Examples of use:
Measuring temperature in outdoor spaces or industrial halls
Suitable for use in humid spaces and areas (cellars, greenhouses, etc.)
Applicable for:
For connection to Unipi Patron or Unipi Neuron units, all you need to do is to interconnect the suitable terminals. For connection to Extension xG18, use a network cable (patch cord) with one of the connectors cut off. Alternatively, you can use a standard FTP/UTP cable with a crimped-on RJ45 connector. A connecting guide and more additional info is available in the article about 1-Wire bus and connection of our sensors.