A variant for sumps (IP65 protection)
Digital 1W sensor featuring the DS18B20 chip
Probe dimensions: u ⌀6* x 120 mm (±0,2 mm*)
Plastic cover dimensions (h x w x d): 70 x 63 x 34 mm
Temperature sensors are suitable for temperature measurements in the range of -10°C to 85°C. With reduced accuracy, the sensors can be used in a range of -40°C to 125°C.
Head ambient working temperature: -30°C to 100°C
Connection: shrouded terminal box
Designed for 4-wire connection used on Unipi sensors and hubs
Can be wired to the RJ45 connector for connection to the Extension xG18 or any Unipi unit via a suitable
splitter
More info and tips regarding the sensor connection is available in the
1-Wire article
-
Examples of use:
Applicable for:
For connection to Unipi Patron or Unipi Neuron units, all you need to do is to interconnect the suitable terminals. For connection to Extension xG18, use a network cable (patch cord) with one of the connectors cut off. Alternatively, you can use a standard FTP/UTP cable with a crimped-on RJ45 connector. A connecting guide and more additional info is available in the article about 1-Wire bus and connection of our sensors.