Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:sw:01-mervis:setting-modbus-server-hidden [2023/05/10 11:15] – [Setting ModbusRTU server (slave)] avsetulaen:sw:01-mervis:setting-modbus-server-hidden [2024/07/24 14:36] (current) – kcerny
Line 104: Line 104:
 You can leave the **Device IP Address** as is (0.0.0.0). The Mervis will internally set it to the current IP address of the PLC. You can leave the **Device IP Address** as is (0.0.0.0). The Mervis will internally set it to the current IP address of the PLC.
  
-The **Device Port** however, you need to set. Typical ModbusTCP port is 502, but there is already running internal application on this port. So set it to 503 for example. +From Mervis IDE 2.6.5 the port 502 was freed, for older version, following applies: the **Device Port** needs to be changed. Typical Modbus TCP port is 502, but there is already running internal application on this port. So set it to 503 for example. 
 </WRAP> </WRAP>
  
(Still can't find what you're looking for?)