Connecting to UniPi

Goal of this tutorial is to demonstrate how to get connection from Mervis on your computer to UniPi controller.

The only way how to program UniPi controller from Mervis is via ethernet connection. Typically, there are two type of physical connections: Local network with DHCP server (most common) or direct connection to UniPi.

Despite the complicated name of this method, it is the most common and the easiest one. Just plug in your computer and UniPi controller to the same network you have e.g. to your wi-fi router. Both the PC and the UniPi will receive IP address from DHCP server (your router). See the diagram below:

Direct connection via ethernet means taking network cable, plug it into the computer and plug the other end to the UniPi controller. Since there is no DHCP server on this small network, your computer and UniPi will assign itself random IP address from 169.254.XXX.XXX range.