This is an old revision of the document!
Analog outputs
Special functions
Default configuration
This function is used to save the current configuration of the section (extension module) into its memory. In the of power cycle of the device or reboot of the section (extension module), the stored configuration is loaded and applied. This functionality is also known as “copy
running-config
to startup-config
”.
Technical parameters
Output terminals | AOV |
Common conductor | AGND |
Galvanic isolation | Yes |
Output functions | 0–10 V⎓ voltage source |
Resolution | 12 bits |
Conversion time | 300 μs |
Protection type | Integrated overvoltage protection |
Output voltage range | 0-10 V⎓ |
Output accuracy | ±0.5 % |