- redesign of the temperature/humidity indoor sensor
- designed for on-wall installation
- compatible with all Unipi 1W devices → 4-wire connection
- easy connection to Unipi units
- possible connection through RJ45 connector via a suitable splitter/hub
- additional info and tips for the sensor and its connection available in the 1-Wire article
Examples of use:
- measuring indoor temperature and rel. air humidity for the purpose of control and regulation of heating, air conditioning, ventilation or heat recovery
Possible applications:
- all Unipi units with 1W bus including Unipi 1.1/Lite
- Unipi 1-Wire hubs or splitters (with RJ45 connection)
The on-wall sensor can be connected directly to the 1W terminal on Patron or Neuron units. Alternatively, you can use a suitable hub or splitter (requires adding RJ45 connector to the sensor's cable); this option allows for connecting multiple sensors to a single unit. RJ45 connector can be also used to connect the sensor to older Unipi Patron or Neuron units, or to Unipi 1.1/1.1 Lite. Further info is available in the 1-Wire article.