• A variant for sumps (IP65 protection)
  • Digital 1W sensor featuring the DS18B20 chip
  • Probe dimensions: u ⌀6* x 120 mm (±0,2 mm*)
  • Plastic cover dimensions (h x w x d): 70 x 63 x 34 mm
  • Temperature sensors are suitable for temperature measurements in the range of -10°C to 85°C. With reduced accuracy, the sensors can be used in a range of -40°C to 125°C.
  • Head ambient working temperature: -30°C to 100°C
  • Connection: shrouded terminal box
  • Designed for 4-wire connection used on Unipi sensors and hubs
  • Can be wired to the RJ45 connector for connection to the Extension xG18 or any Unipi unit via a suitable splitter
  • More info and tips regarding the sensor connection is available in the 1-Wire article
  • Link to e-shop: link

Examples of use:

  • Measuring temperature of media in pipelines
  • Suitable for measuring temperature in air conditioning ducts

Applicable for:

  • All Unipi units with a 1W bus, including the Unipi 1.1/Lite
    • With Unipi 1W hub and splitter
  • Unipi Extension xG18

For connection to Unipi Patron or Unipi Neuron units, all you need to do is to interconnect the suitable terminals. For connection to Extension xG18, use a network cable (patch cord) with one of the connectors cut off. Alternatively, you can use a standard FTP/UTP cable with a crimped-on RJ45 connector. A connecting guide and more additional info is available in the article about 1-Wire bus and connection of our sensors.

(Still can't find what you're looking for?)