Toto je starší verze dokumentu!


FIXME This page is not fully translated, yet. Please help completing the translation.
(remove this paragraph once the translation is finished)

Other peripherals

Cesta v operačním systému:

/run/unipi-plc/by-sys/tpm/dev

Podrobnosti:

  • Trusted Platform Module 2.0
  • Výrobce: Infineon
  • Čip: OPTIGA SLB 9672 FW16
  • Sběrnice: spi6

Čip TPM poskytuje kryptografické funkce pro zabezpečení hardwarové identity a integrity zařízení. Obsahuje unikátní klíče a obsahuje certifikáty výrobce a vlastní klíče pro ověření totožnosti jednotky.

Cesta v OS /run/unipi-plc/by-sys/tpm/dev
Verze TPM Trusted Platform Module 2.0
Sběrnice SPI (33 MHz)

TPM technical parameters

Cesta v operačním systému:

/run/unipi-plc/by-sys/tpm/dev

Podrobnosti:

  • Trusted Platform Module 2.0
  • Výrobce: Infineon
  • Čip: OPTIGA SLB 9672 FW16
  • Sběrnice: spi6

Čip TPM poskytuje kryptografické funkce pro zabezpečení hardwarové identity a integrity zařízení. Obsahuje unikátní klíče a obsahuje certifikáty výrobce a vlastní klíče pro ověření totožnosti jednotky.

Cesta v OS /run/unipi-plc/by-sys/tpm/dev

%hide technické parametry

Verze TPM Trusted Platform Module 2.0
Sběrnice SPI (33 MHz)

Retain memory is a fast non-volatile memory used for storing current values of chosen variables. It is separated from eMMC storage and thus do not reduce the lifespan of the main storage.

Path in the OS /run/unipi-plc/by-sys/retain/mem

Retain technical parameters

Memory size 128 kB (default)
Memory type FRAM
Bus SPI (30 MHz)
Lifespan 1013 times / byte

RTC (Real-time clock) can keep track of elapsed time, even when the device is powered off or is not connected to internet.

Path in the OS /dev/rtc

RTC technical parameters

Battery CR2032 lithium battery
Calibrated Yes
Bus I2C
Lifetime approx. 10 years

(!)

Note:
Dedicated watchdog and Master watchdog (MWD) are two separate systems! While dedicated watchdog monitors if the operating system is running correctly, the MWD is present only for variants with I/O and monitors communication with I/O board.

Each unit contains dedicated watchdog. If either system deamon (systemd) or kernel (Linux) hangs, it can reset the compute module and lower IO boards by power cycling them. This watchdog is turn on by default, therefor no set up for the watchdog is needed.

Input device emulating the ENTER key. It is also used to access the service mode.

Path in the OS /dev/input/event0

User programmable LEDs which can be set to indicate any event or state. They can be controlled from the user program or directly from OS.

Path in the OS /run/unipi-plc/by-sys/ULEDx/brightness

(!)

Note:
Replace x with ULED number.


Color Green
Off value 0
On value 1 (or any other than 0)
Tento web používá cookies. Používáním těchto stránek souhlasíte s ukládáním cookies do vašeho počítače. Také berete na vědomí, že jste si přečetli a porozuměli našim Zásadám ochrany osobních údajů. Pokud nesouhlasíte s odchodem z webu.Více informací