This is an old revision of the document!

Mervis tutorials

YouTube tutorials

  1. Unipi Neuron Quick Start Guide
  2. Unipi Axon Quick Start Guide
  3. Unipi 1.1/Lite Quick Start Guide

Getting started with Mervis:

  1. Obtaining a licence for Mervis DB, Mervis Proxy and Mervis RT
  2. Mervis on Unipi Patron
  3. Mervis on Unipi Neuron
  4. Mervis on Unipi 1.1 & Lite
  5. Mervis on Unipi Gate
  6. Mervis on Unipi Axon
  7. Connecting Mervis IDE to Unipi

Unipi units
Patron, Neuron, Gate, Axon

First run:

  1. First project with a Unipi unit revised
  2. Mervis RT licencing
  3. Working with Autogen revised

Inputs/outputs of PLC:

  1. PWM on digital outputs
  2. Digital inputs: debounce, counter and direct switch
  3. Analog outputs
  4. Analog inputs

Extension boards
Unipi 1.1 / Unipi 1.1 Lite

First run:

  1. First project with Unipi 1.1/Lite revised
  2. Mervis RT licencing
  3. Working with Autogen revised

Number increase of outputs:

  1. Connecting the EMO-R8 to Unipi 1.1 NEW

Common tutorials

HW and RunTime (RT) configuration:

  1. Uploading configuration
  2. Configuration of the Unipi module
  3. Updating runtime (RT)
  4. Uploading a RunTime configuration

PLC services and settings:

  1. Configuration of date, time and timezone
  2. WiFi configuration
  3. Secondary ethernet configuration
  4. LTE configuration
  5. Receiving/sending SMS REVISED18. October 2022
  6. Sending emails NEW3. August 2023

Modbus Protocol:

  1. Connecting to Modbus slave
  2. Connecting to Unipi extension
  3. Connecting the Extension xG18 to Mervis IDE
  4. Connecting Mervis IDE to Weintek HMI device using the ModbusTCP/RTU protocol
  5. Setting a Modbus server (slave)

Other protocols:

  1. Connecting Mervis IDE to Weintek HMI device using the BACnet/IP protocol
  2. Communication between Mervis IDE and Jablotron 100
  3. Controlling a PLC through SSCP protocol from another PLC
  4. Attaching 1-Wire devices
  5. Automatic restart of the 1-Wire bus

Mervis Cloud:

  1. Obtaining a licence for Mervis DB, Mervis Proxy and Mervis RT
  2. Storing data into a history log
    1. Advanced history log configuration
    2. Download history log from PLC
    3. Storing data into Mervis DB
  3. Connecting to Unipi via Mervis Proxy
  4. Creating a Mervis SCADA project REVISED7. February 2022
  5. Multiple temperature monitoring using xG18 extension

HMI templates (graphic schemes):

  1. Creating a HMI for local PLC webserver
  2. Creating a HMI for an external PLC webserver
  3. Creating a HMI for Mervis SCADA (cloud)

HMI gadgets:

General instructions Mervis IDE:

  1. Validace certifikátu SSL NEW11. October 2023
  2. State mapping - HMI, SCADA, History

Useful tips

(Still can't find what you're looking for?)